This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Spray Gun Problem
Forum rules
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.
FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.
Send issues regarding reviews to Cub@farmallcub.com.
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.
FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.
Send issues regarding reviews to Cub@farmallcub.com.
- John C
- 10+ Years
- Posts: 489
- Joined: Sat Nov 01, 2008 7:05 pm
- Zip Code: 30152
- Tractors Owned: 1948, 1949, 1953, 1961 Cubs
1941 Minneapolis Moline
1939 John Deere H
1986 IMT 539
Multiple Ford 8Ns that aren't any good - Location: Kennesaw, GA
Spray Gun Problem
I got out my Accuspray HVLP gun tonight for spraying some primer. I haven't used it in a couple years maybe. When I ran laquer thinner through it, it sprayed fine, but the thinner continued to shoot out in a stream after the air flow stopped. What could cause this?
"If every day were a holiday, sport would soon become chore"
- ricky racer
- 10+ Years
- Posts: 6337
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Spray Gun Problem
I would assume that you need to take it apart and clean it again. Something isn't seating properly.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
- John C
- 10+ Years
- Posts: 489
- Joined: Sat Nov 01, 2008 7:05 pm
- Zip Code: 30152
- Tractors Owned: 1948, 1949, 1953, 1961 Cubs
1941 Minneapolis Moline
1939 John Deere H
1986 IMT 539
Multiple Ford 8Ns that aren't any good - Location: Kennesaw, GA
Re: Spray Gun Problem
Thanks Ricky. I suspect the gasket that seals the cup is dried out and is not sealing properly. I will have to go online and find a replacement.
The good news is that I suddenly recalled having purchased a kit last year that included a case, three HVLP guns, and a set of cleaning tools. I got out the biggest gun and it worked great. I had always wanted to try a gravity feed gun and I was very pleased with the results over the siphon feed.
The good news is that I suddenly recalled having purchased a kit last year that included a case, three HVLP guns, and a set of cleaning tools. I got out the biggest gun and it worked great. I had always wanted to try a gravity feed gun and I was very pleased with the results over the siphon feed.
"If every day were a holiday, sport would soon become chore"
Return to “Tool Talk and Reviews”
Who is online
Users browsing this forum: No registered users and 7 guests