Page 1 of 1
Drill Doctor
Posted: Mon Nov 11, 2013 1:55 pm
by Winfield Dave
Santa came early at my house.
Been watching Craigslist a while to see if a Drill Doctor would pop up.
Picked up this like-new 500x today...
Already ordered the larger chuck to sharpen the 1/2" thru 3/4" bits.
- Drill Doctor 500x.JPG (118.28 KiB) Viewed 803 times
Re: Drill Doctor
Posted: Mon Nov 11, 2013 2:19 pm
by John *.?-!.* cub owner
I really like mine, but it has a zip up bag to store it in, which is a lot handier than the molded case.
Re: Drill Doctor
Posted: Mon Nov 11, 2013 3:42 pm
by tnestell
Winfield Dave wrote:Santa came early at my house.
Been watching Craigslist a while to see if a Drill Doctor would pop up.
Picked up this like-new 500x today...
Already ordered the larger chuck to sharpen the 1/2" thru 3/4" bits.
Dave, What is the price for the larger chuck? Thanks, Ted
Re: Drill Doctor
Posted: Mon Nov 11, 2013 4:57 pm
by Winfield Dave
tnestell wrote:Dave, What is the price for the larger chuck? Thanks, Ted
$35 plus s/h at
Drill Doctor $28 free s/h on ebay.
Re: Drill Doctor
Posted: Tue Nov 12, 2013 9:39 pm
by redfin
Good job Dave. rejuvenate 2 , 3/4" bits and you have recovered its cost . this is a fantastic pieces to have in the shop.
Re: Drill Doctor
Posted: Wed Nov 13, 2013 10:22 am
by John *.?-!.* cub owner
I bought mine about 4 years ago, after waiting and watching a while. I found on Ebay a 500series that had been a store display, ad had no box or chuck, but was complete with everything else, including carry bag, manuals, cd, etc. Got it for $35. I watched Ebay for a few more days, and got the 3/4 chuck which also goes down to 1/8 for $15. It took about a week to pay for itself, and over the 4 years since I bought it has saved me enough to pay for several of them. It really paid off when I put Helicoils in a few finals, both for me and for a couple of friends.