Switch to full style
How do I.... ?
Post a reply

Printer Help

Thu Jul 22, 2010 7:26 pm

Folks,

I tried to print this http://farmallcub.com/phpBB2/viewtopic.php?f=11&t=44196&start=0&view=print off and all I got was three pages. Any help is appreciated.

Bill

Re: Printer Help

Thu Jul 22, 2010 7:59 pm

Bill:

I checked the link you gave for the preview and all that showed up was:

Farmall Cub

IHC / Farmall
http://farmallcub.com/phpBB2/
How To Rebuild a Touch Control Pump

http://farmallcub.com/phpBB2/viewtopic.php?f=11&t=44196
Page 1 of 1
How To Rebuild a Touch Control Pump
Posted: Sun Aug 02, 2009 3:05 pm
by troopfpc
Here is a pictorial on how to rebuild a touch control pump. A few things to keep in mind:

All parts must be thoroughly cleaned before re-assembling.
You must lubricate everything when putting it back together.
Make sure the hydro fluid gets into the pump from its lines before running the tractor.
Running the pump while dry will quickly ruin it.
The repair kits come with extra parts that will not be needed and the directions with the kits are not that good. They only cause confusion on where the parts go. Refer to the pictures here to get it done right.
Enjoy......


So I went to the url of the article you tried to print.

In IE 8 I used the print preview and it came up nicely .. but 20 pages .. depended on the size of the pics and where they ended up on the page.
In Opera 10.6 and again the print preview and it also came up nicely but 12 pages.
In FireFox 3.5.7 with print preview similar to IE 8 ... 21 pages.

I did not try to actually print but the preview is pretty representative of what you will get or should. If it didn't print entirely there had to be a corruption in the file generated by your printer software or something like that I would think. Not sure how much that helps... :big give up:

update: There is something wrong cause there really should not be that many pages coming up for the print queue. I will try to print it a bit later and see what happens. (gotta go to the airport)

Re: Printer Help

Thu Jul 22, 2010 10:00 pm

I tried the first link and got the full post on my screen...then went to print preview and got only 3 pages.
Went to the post url and same thing happened.
This happened to me the other day as well...wasn't important then, so I just moved on.
Even just print previewing from the post shows only 3 pages.
I'm using Firefox.

Re: Printer Help

Fri Jul 23, 2010 6:26 am

Winfield Dave wrote:... I'm using Firefox.


I am, also. I forgot that important detail.

Bill

Re: Printer Help

Fri Jul 23, 2010 8:56 am

I prefer Firefox to IE, but have noticed the problem of it only printing part of a multipage document before. If you have downloaded the IE add ons for Firefox, all you have to do is right click on the page and then select open in Internet Explorer

Re: Printer Help

Fri Jul 23, 2010 4:11 pm

Firefox is becoming as problematic as IE 7 was. I have been finding that Opera, Safari and Chrome are more stable for a lot of stuff and especially are better suited to handle the things that Firefox or IE cannot handle.

Example.. the manual server only gets messed up with Firefox. It works properly in every other browser that I have loaded. Ain't really pretty in all of them, but it does work and will do fine until I can get the new one done. That is taking a lot of time unfortunately.
Post a reply