Valspar Restoration PaintModerators: Team Cadet, Team Cub
Forum rules
Post your personal experiences with products and services here. PLEASE: Do not post bad reviews until all attempts to reach an equatable settlement have all been exhausted. (Attempts to use the forum to leverage a settlement in your favor will result in deletion of your review.)
6 posts
• Page 1 of 1
Valspar Restoration PaintI have been talking to people in the paint dept at our local Lowe's store about ordering or stocking Valspar tractor paint. They are very supportive and are trying to convince the right people to stock the paint. I had to pledge to them that I would pass along to all who are interested in this paint to purchase it, when they stock it. So, I am passing this along. Everyone on here who would like Lowes to stock the Valspar tractor paint should talk to the paint dept. at their local stores. I am down to one used and one new rattle can, so we need to keep asking about the paint.
1947 Cub S/N 9216 (My Dad's "Uncle Bob")
We make a living by what we get, but we make a life by what we give......Winston Churchill
Re: Valspar Restoration PaintI order the valspar through my lowes store, you have to buy it by the case, gallons are 2 cans, qts are 4 cans and rattle cans are 6 in a case, there are no shipping charges and the price was cheaper than tractor supply
Tim
Re: Valspar Restoration PaintYou can also get it from Amazon by the can, about $10 each.
Re: Valspar Restoration PaintCan you post the official color name and number that lowes has for the Valspar IH Red please.
Jeff
Re: Valspar Restoration PaintMy store has yet to order any, so I don't know what their number will be. I don't need any just at this time. I wanted to see if they can stock it for future use. Sounds like we have a good shot of them getting it for us.
1947 Cub S/N 9216 (My Dad's "Uncle Bob")
We make a living by what we get, but we make a life by what we give......Winston Churchill
Re: Valspar Restoration Paintgo to the valspar site, they have all the paints listed with part#s
Tim
6 posts
• Page 1 of 1
Return to Tool Talk / Products & Services reviews Who is onlineUsers browsing this forum: No registered users and 1 guest |
|