Bostik Never-Seez, Regular Grade

Thu Oct 23, 2008 7:43 pm

The topic of never seize came up a while back, so I thought I would share what I use. Hasn't let me down yet. Has a brush on the lid of the can.
I do not know where to purchase this stuff other than ordering online, a friend of mine gets it from his work.
http://www.jdindustrialsupply.com/regrne.html
From the website:
"Bostik NSBT-16 never-seez is the "original" anti-seize compound formulated with copper, graphite, aluminum and other ingredients to protect up to 1800 degrees F against seizure and galling, galvanic and environmental corrosion. Meets MIL-A-907E, Ford ESE-M12A4-A, Garrett Engine Div. PCS5724, Pratt & Whitney PWA 360523-2."

Image

Re: Bostik Never-Seez, Regular Grade

Sat Nov 22, 2008 2:56 pm

screwstick the stuff never goes bad either, i was looking at the new design of the can and i'm not sure if i have one of the new ones ,but i have about 4 or 5 different cans with different looks. i don't have to look to far to find a can of that around here. michael

Re: Bostik Never-Seez, Regular Grade

Fri Feb 06, 2009 7:24 am

They also offer it in a blue moly too.

Re: Bostik Never-Seez, Regular Grade

Wed Mar 11, 2009 3:43 pm

Would the blue moly in cartridge form be the best way to go for lubing grease fittings on the cub?

Re: Bostik Never-Seez, Regular Grade

Wed Sep 12, 2012 4:04 pm

I've got can of Never-Seez that I've had for about 30 years. A little goes a long way and it really works. I also have some of it in a tube. Just don't get it on your clothes. It won't wash out, even after 20 years. I have some old coveralls to prove it. The good news is that it stays on the bolts you put it on, and they back out just as easily as they went in, many years before.

Ed