- img049_crop.jpg (26.44 KiB) Viewed 251 times
Abrasive Ball
Moderators: Team Cub, Team Cadet
Forum rules
Post your personal experiences with products and services here.
PLEASE: Do not post bad reviews until all attempts to reach an equatable settlement have all been exhausted. (Attempts to use the forum to leverage a settlement in your favor will result in deletion of your review.)
Post your personal experiences with products and services here.
PLEASE: Do not post bad reviews until all attempts to reach an equatable settlement have all been exhausted. (Attempts to use the forum to leverage a settlement in your favor will result in deletion of your review.)
1 post
• Page 1 of 1
Abrasive Ball
by Rodney51Cub » Mon Jan 23, 2012 5:38 pm
I bought this abrasive ball at Harbor Freight to clean the rust out of the head and cylinders on my JD A. While it did not remove all the rust it did a very good job. It is very flexable and may work on Cub front axle tubes. I used a 6" drill bit extention for my cylinders.
Farmall Cub Ol Red # 137572 August 1951
Sometimes, I amaze myself !
If you can not learn to do it well, learn to enjoy doing it badly.
Sometimes, I amaze myself !
If you can not learn to do it well, learn to enjoy doing it badly.
- Rodney51Cub
- Cub Star
- Posts: 178
- Joined: Fri Feb 11, 2011 6:06 pm
- Location: Southern Illinois
- Zip Code: 62995
- Tractors Owned: 1951 Farmall Cub
C-22 sickle mower
Bush Hog 412 mower
193 plow
144 cultivators
1950 John Deere A 
- Circle of Safety: Y
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
|
|