Product & services reviews. Lubricants, rust removers, hoists, tools, powder coating, etc.
Forum rules
Post your personal experiences with products and services here.
PLEASE: Do not post bad reviews until all attempts to reach an equatable settlement have all been exhausted. (Attempts to use the forum to leverage a settlement in your favor will result in deletion of your review.)
Tue Jul 10, 2012 9:02 am
Well a few monnths ago I broke down and bought a new carbuerator off of Ebay. It was one of the reproduction IH carbs. When I first installed it it would crank very easily but then die after about 20 to 30 seconds. I took it apart and adjusted the float travel and that solved that issue. I have been running it ever since and just wanted to say that it is working very well and I am very pleased with it. Other than adjusting the float travel it has been hands off wonderful.
Just wanted to share my experience with this reproduction carb
CPIII
Tue Jul 10, 2012 9:46 am
I too purchased one of these aftermarket 3/4" updraft carbs a few years ago and have had no issues with it at all.
Wed Jul 11, 2012 12:37 pm
Homstead wrote:I too purchased one of these aftermarket 3/4" updraft carbs a few years ago and have had no issues with it at all.
Same here. Mine was purchased from TMTractor when he stocked them.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.