making support rods(last of the pics)

Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.

Moderator: Team Cub

making support rods(last of the pics)

Postby Rick Prentice » Wed Jan 05, 2011 8:52 pm

Thought some of you guys would like to see some of the work involved to making the support rods. Both sides are basically the same steps, just different lengths and bends. A couple years ago when my dad was coming over giving me a hand with things, I asked him to build me 3 stands with rollers that would also double as a steel rack. They work great. Here's some of the steel for the supports and the snow shoes.
Image

I start out by setting up a stop on the band saw. That allows for a bunch of pieces cut the exact same length.
Image

The pieces are all sanded to eliminate burrs before they go into the lathe.
Image

Once all the parts are sanded, the lathe gets a workout, beginning with center drilling, to drilling, to tapping
Image

I still use my ELMER 2, a homemade bender thrown together from a bunch of hydraulic parts and pieces from auctions, ebay, flee markets, the neighbors left over hoist extensions, and steel from the local scrap yard.
Image

There's a bunch more pictures scattered on these 2 pages from the photohost: http://photos.cubfest.com/thumbnails.php?album=603&page=2

I'll post some more pictures tomorrow after I do some welding.

Thanks for viewing,
Rick
Last edited by Rick Prentice on Fri Jan 07, 2011 6:56 pm, edited 1 time in total.
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Mr E » Wed Jan 05, 2011 9:03 pm

That is very interesting, Mr. Rick. Wish I was close by, I'd beg you to let me watch the process. :mrgreen:
In the middle of every difficulty lies opportunity. - Albert Einstein


Roy Edenfield
Deep South CubFest
February 13 & 14, 2015
User avatar
Mr E
501 Club
501 Club
 
Posts: 5333
Joined: Mon Jul 30, 2007 11:48 am
Location: FL, Sneads
Zip Code: 32460
eBay ID: noles1432460
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Barnyard » Wed Jan 05, 2011 9:15 pm

Hey Rick, where were these pix taken. I don't remember the shop being that clean last time I was there. Did Gary Dotson and David Grapes pay you a shop makeover visit too? :)
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17520
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Bill Hudson » Wed Jan 05, 2011 9:19 pm

Mr E wrote:That is very interesting, Mr. Rick. Wish I was close by, I'd beg you to let me watch the process. :mrgreen:


Mr. Roy, you're going to have to stand in line. :) :)

Bill
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
Bill Hudson
Team Cub
Team Cub
 
Posts: 6244
Joined: Wed Jul 26, 2006 10:50 am
Location: OH, Madison
Zip Code: 44057
Tractors Owned: :
57 F-Cub
64 Lo-Boy
68 Lo-Boy
52 F-Cub
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Rick Prentice » Wed Jan 05, 2011 9:22 pm

I don't remember the shop being that clean last time I was there.
I'm not done yet. I'm thinking about painting my pegboard silver and buying some bright red formica for my benchtop :shock:

Thanks guys,
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Bill E Bob » Wed Jan 05, 2011 9:29 pm

Sure wish I had that equipment :mrgreen: Do you save the "leavings" and recycle them to the scrap yard? Looks like lots of $$ left on the floor with all the required machining :wink: However, the end product (to me) is worth all that and more :D
Bill E Bob
501 Club
501 Club
 
Posts: 2782
Joined: Wed May 31, 2006 12:09 pm
Location: OK, Skiatook
Zip Code: 74070
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Rick Prentice » Wed Jan 05, 2011 9:51 pm

Do you save the "leavings" and recycle them to the scrap yard?
Yep Bill. Any scrap metal, shavings, or even plasma dust, goes into a tub and eventually ends up at M+K Scrapyard. It's a pleasant surprise when you take scrap and walk away with $40-$50 in your pocket :D But right across the street from the scrapyard is Big Buffalo Pawn shop----they always have neat stuff to buy.
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Bill E Bob » Thu Jan 06, 2011 3:40 am

Rick Prentice wrote:
Do you save the "leavings" and recycle them to the scrap yard?
Yep Bill. Any scrap metal, shavings, or even plasma dust, goes into a tub and eventually ends up at M+K Scrapyard. It's a pleasant surprise when you take scrap and walk away with $40-$50 in your pocket :D But right across the street from the scrapyard is Big Buffalo Pawn shop----they always have neat stuff to buy.

Location, Location, Location :wink:
Bill E Bob
501 Club
501 Club
 
Posts: 2782
Joined: Wed May 31, 2006 12:09 pm
Location: OK, Skiatook
Zip Code: 74070
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby John *.?-!.* cub owner » Thu Jan 06, 2011 10:22 am

Rick Prentice wrote:......... But right across the street from the scrapyard is Big Buffalo Pawn shop----they always have neat stuff to buy.
I envy people that have pawn shops with reasonable prices. The ones around here have worn out stuff priced within just a few dollars of new.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19103
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Re: making support rods

Postby Rick Prentice » Thu Jan 06, 2011 6:05 pm

I finished up some more of the braces today. Here's the material I use for the right and left pads. The right side is pretty simple to make, but the left side is a pain. After drilling the 5/8" and the 7/8" holes, the piece gets clamped in the mill and a 3 degree angle gets flycut off the bottom, then a radius has to be ground to mate with the casting by the hyd pump area.
Image

A dummy block hangs off the end of ELMER and allows me to install the pads and the rods in place to assure proper alignment while welding. Here's a left and right pic of the items in place just before welding
Image
Image

Once the pads are welded to the rods,
Image
they're flipped upside down and aslo plug welded from the bottom.
Image

Here's an almost finished set of braces,
Image
They still need to have the flats milled on both sections(used to hold the rods in place while tightening) and then sandblasted and primered.

I ordered some packets of "anti-sieze" today. Once the braces are all painted by the member, they can apply some anti-sieze to all the thread sections in case years down the road they need to remove the braces to do a clutch job or engine R+R. Each order will have an instruction sheet with an anti-sieze packet stapled to it.

Thanks again,
Rick
Last edited by Rick Prentice on Fri Jan 07, 2011 8:52 am, edited 1 time in total.
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Mr E » Thu Jan 06, 2011 7:01 pm

Rick,
Forgive my ignorance, but exactly was is "plug welded"? :oops:
In the middle of every difficulty lies opportunity. - Albert Einstein


Roy Edenfield
Deep South CubFest
February 13 & 14, 2015
User avatar
Mr E
501 Club
501 Club
 
Posts: 5333
Joined: Mon Jul 30, 2007 11:48 am
Location: FL, Sneads
Zip Code: 32460
eBay ID: noles1432460
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Barnyard » Thu Jan 06, 2011 7:10 pm

Mr E wrote:Rick,
Forgive my ignorance, but exactly was is "plug welded"? :oops:

Roy, notice in Rick's first picture there are flat plates with two holes in them. The rod goes into the larger hole and is welded. The plug weld is when it is welded through the hole on the bottom side.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17520
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Rick Prentice » Thu Jan 06, 2011 7:52 pm

Yep, Mr. Roy, Barnyard has you covered. I keep the 7/8" rod about an 1/8" from being flush with the backside. That allows me to fill(plug) that cavity full of weld. Something drastic will have to happen for those pads to ever come off :shock:

Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
User avatar
Rick Prentice
Team Cub Guide
Team Cub Guide
 
Posts: 5359
Joined: Mon Nov 01, 2004 7:24 am
Location: OH, Grand Rapids (historical town along the Maumee River)
Zip Code: 43522
Tractors Owned: 47(circle cub),48(Floyd),49,50demo from GW's collection),51,52(backhoe),53,54,55(Nickles)
Circle of Safety Award
Circle of Safety: Y

Re: making support rods

Postby Rudi » Thu Jan 06, 2011 10:41 pm

Rick:

Just in case you really need it, I got two sheets of almost IH 2150 Red plastic laminate in the shop :lol:

What amazes me is the similarities in how trades set up for a production run/one off piece. A lot of what you do is the very same as what I do.. the only difference is the medium in which we work primarily. The medium defines some of the specialized skills needed but the basics are allied. The mark of a professional is in the details.. how things are set up to produce a part. Rick my friend, you are a real professional. I like your shop. It may be small (mine is too) yet some top notch products emerge from within the confines of your play room.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28425
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Re: making support rods

Postby Ben B » Fri Jan 07, 2011 6:54 am

I'm very impressed with your little fabrication shop. Your welds look better than most factory weld jobs I have seen.

Those brackets look like they would be a very wise investment.
GOD BLESS AMERICA!!!! Land that I love!
User avatar
Ben B
Cub Star!!
Cub Star!!
 
Posts: 255
Joined: Fri Apr 09, 2010 4:49 am
Zip Code: 24354
Tractors Owned: 1950 Farmall Cub
2012 Cub Cadet

Next

Return to Projects Forum

Who is online

Users browsing this forum: No registered users and 2 guests