Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.
Tue Feb 22, 2011 9:57 am
There was some discussion in another part of this forum about watching out for fingers around rotating fan blades. So, I thought this was the best place to show the blades associated with my other hobby. This is an 18" prop that occasionally reaches 15,000 rpm. We do start them by hand, but prefer electric starters on a thumper this big. It's a four stroke over head valve engine about 2.5 hp burning alcohol, nitro, and castor. The plane itself is a 1/4 scale Super Decathlon with an 89" wingspan. The bears in the cockpit were flown around the world in an effort to cheer a very ill member of a forum much like this one.
Unfortunately they were lost in Australia. There are occasional prop bites, so you learn to follow a strict safety code.
Tue Feb 22, 2011 12:52 pm
Nice. I've always enjoyed watching the model folks displaying their skills. Grump
Sun Feb 27, 2011 5:11 pm
Prop bites?? That looks like it could take your hand off at the wrist if your not careful.
Mon May 16, 2011 11:46 am
I respect the prop, for sure...It can barely be seen when running. Painting the tips white helps..
P.S. I don't know why I just saw the response, Mike!
Thu Jun 30, 2011 8:38 pm
my dad made a hand wind up starter for these but he never patented it. You wound it up and put it into two slots on the nose cone and pulled the trigger it would rotate the engine and start it and the two drivers would leave the slots as the prop spun. We used it on all the bigger engines at the time.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.