Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.
Sun Mar 27, 2011 2:32 pm
Do we have any registered electricians on the board? I have a fairly (I think) simple wiring question. Thanks.
Sun Mar 27, 2011 4:41 pm
Throw it out there and let us have a stab at it.
Sun Mar 27, 2011 4:59 pm
Give me a call.
Sun Mar 27, 2011 7:07 pm
OK, here goes. I have an older Crouse-Hinds, Type F, 100 amp load center in one of my outbuildings. The single pole breakers in it are Crouse-Hinds and labeled as Type MP. I want to add a 220/240 circuit for a welder outlet. Whose commonly available breakers can I use in this load center?
Sun Mar 27, 2011 8:00 pm
Plenty of them on ebay starting at 4 bucks. Murray bought the product line.
Sun Mar 27, 2011 8:08 pm
Bob, so then a Murray should work?
Sun Mar 27, 2011 8:17 pm
Looks like it, from what is written on the electrical contractors forums plus they are called Crouse Hind/ Murray MP breakers. I did also see a reference to Cutler Hammer CL breakers being interchangeable.
Sun Mar 27, 2011 8:19 pm
I pulled an unused 20 amp breaker out of the box. I'll take it with me tomorrow and compare it to a Murray.
Sun Mar 27, 2011 8:20 pm
what size you looking for?
Sun Mar 27, 2011 8:21 pm
50 amp, double pole.
Sun Mar 27, 2011 8:43 pm
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.