Page 1 of 1
Food Grade Paint
Posted: Sun Jun 26, 2011 11:15 am
by daddydip
I am looking for a lead on either a food grade paint or coating for my fruit press.The bottom plate has a light rust on it that I don't think would help the taste of any pressed juice. I have googled it and tried to find something appropriate and have came up with a big 0 so far any help out there?
Re: Food Grade Paint
Posted: Sun Jun 26, 2011 11:55 am
by beaconlight
I would coat it with oil between uses and power wash to remove the oil when I use it.
Re: Food Grade Paint
Posted: Sun Jun 26, 2011 12:06 pm
by Mr E
From a wood-turners perspective:
avoid vegetable and nut oils
these will go rancid after a while. Beside the General Products Salad bowl finish, which is a good choice, light mineral oil will also work, as it does not impart a taste and is not a problem for people with sensitivities to nut oils.
Re: Food Grade Paint
Posted: Sun Jun 26, 2011 7:58 pm
by Jimdawg
Mineral oil is what I use on wood cutting boards.
2 coats on a new board and a single coat annually.
~ Jim
Re: Food Grade Paint
Posted: Mon Jun 27, 2011 12:57 pm
by daddydip
Thanks fella's I think I might have a clue.
Re: Food Grade Paint
Posted: Thu Jul 28, 2011 6:42 am
by BigMatt
I worked at Krispy Kreme Doughnuts in college and we used mineral oil for everything in our extruding machines.
Re: Food Grade Paint
Posted: Thu Aug 04, 2011 8:22 pm
by EarlyCub49
Try this link, maybe it will help food grade polyurethane for apple cider presses.
http://www.homesteadharvest.com/ezpopi.htmlBruce T.
Re: Food Grade Paint
Posted: Sun Aug 07, 2011 9:45 pm
by daddydip
Hot Diggety that is exactly what I have been looking for, thanks Early Cub