Page 1 of 1
Refinished the Trailer Deck & Added Tail Jacks
Posted: Sat May 26, 2012 8:42 pm
by Peter Person
Finally found a product I hope lasts more than a year for my trailer deck. I had been using a "high quality" water based deck stain but had to redo every year. Stopped in to a local paint store where the owner has been really helpful in the past.
He recommended
Penofin Blue LabelI had to sand off the remnants of the latex stain - not a bad job with an 80 grit paper on the belt sander for the large areas and on the palm sander for the edges and around the D-rings. The sanding also gave me opportunity to smooth out the knots and raised edges.
Aron and I got the 1st coat on in about 30 minutes. Still need to put another coat on. As soon as we started I really liked the look. The color I chose is "Sable".
I forgot to take a picture before sanding but here is what it looked like after sanding;
Just starting;
1st Coat;
Thanks for looking.
Peter
Re: Refinished the Trailer Deck
Posted: Sun May 27, 2012 12:45 pm
by Anonymous_h
Looks good! - I will try that brand when I do mine this summer when the dry season hits. Thanks
Re: Refinished the Trailer Deck
Posted: Sun May 27, 2012 8:04 pm
by Rudi
Yup, looks real nice Peter
Re: Refinished the Trailer Deck
Posted: Mon May 28, 2012 6:39 pm
by Winfield Dave
Looks good Peter !!
Re: Refinished the Trailer Deck & Added Tail Jacks
Posted: Sat Aug 04, 2012 12:09 pm
by Peter Person
Took the thread concerning Gary & Kristy Bailey to heart and added jacks to the tail of my trailer.
Prayers for Gary & Kristy BaileyBought two (2) Pro Series 2,000lb Swivel Side Handle Jacks online from Hitch Shops for $76 incl. shipping. Ordered them last Friday and they arrived on Wednesday.
Step #1: Layout
Step #2: Set up
Step #3: Tack Weld
Step #4: Aron Welding
Step #5: Finished
Step #6: Jack Mounted & Trailer Lifted (this will make changing a tire easy!)
Step #7: Jack Swiveled for Travel
All that's left is to prime & paint the welded socket.
Once I get the tailgate repaired
, we'll give it a test run.
Peter
Re: Refinished the Trailer Deck & Added Tail Jacks
Posted: Sat Aug 04, 2012 12:59 pm
by Winfield Dave
Super design and fab, Peter [Aron, too]
Great side benefit = changing tires via the jacks.
Re: Refinished the Trailer Deck & Added Tail Jacks
Posted: Sat Aug 04, 2012 3:23 pm
by Super A
Your jack setup is almost exactly like what I did. I think you will really like them and you are right, they make changing a tire so much easier!
Al
Re: Refinished the Trailer Deck & Added Tail Jacks
Posted: Sat Aug 04, 2012 4:27 pm
by Don McCombs
Peter Person wrote:Once I get the tailgate repaired
Do you have something you'd like to tell us about, Peter?
Re: Refinished the Trailer Deck & Added Tail Jacks
Posted: Sat Aug 04, 2012 4:58 pm
by Bill Hudson
Don McCombs wrote:Peter Person wrote:Once I get the tailgate repaired
Do you have something you'd like to tell us about, Peter?
My thought as well, Don.
Bill
Re: Refinished the Trailer Deck & Added Tail Jacks
Posted: Sat Aug 04, 2012 5:49 pm
by Peter Person
Bill Hudson wrote:Don McCombs wrote:Peter Person wrote:Once I get the tailgate repaired
Do you have something you'd like to tell us about, Peter?
My thought as well, Don.
Bill
Earlier this summer Aron's 1995 Ford Ranger had a wheel bearing seize. Off to the rescue with the trailer. Unfortunately the expanded metal grating does not hold up too well under the weight of a Ford Ranger. Even using the trailer for the Cub there was beginning to be a pretty good sag in the mesh. Aron and I had previously talked about welding in some reinforcing angles under the mesh. Now we are looking at replacing some or all the mesh with something a little more stout.
...and now you know the rest of the story.
Peter
Re: Refinished the Trailer Deck & Added Tail Jacks
Posted: Sat Aug 04, 2012 7:09 pm
by ricky racer
Very well thought out design and execution!! I love the simple design and clean fabrication. Very professional job.
Re: Refinished the Trailer Deck & Added Tail Jacks
Posted: Sat Aug 04, 2012 8:35 pm
by Dale Finch
Peter Person wrote:. Aron and I had previously talked about welding in some reinforcing angles under the mesh. Now we are looking at replacing some or all the mesh with something a little more stout.
When you finish your reinforcements, please post some photos, because I was planning on adding some angle iron to the ramp on my "new" 18' trailer for the same reason, and if you come up with something better, I would love to see it!
I really like your jacks! Want to do another one in NC?! Or I will be in VA next weekend!!??
Re: Refinished the Trailer Deck & Added Tail Jacks
Posted: Mon Sep 03, 2012 10:19 am
by thiggy
Seeing this post brings to mind my experience with my trailer last winter. I had purchased a new trailer the previous spring and decided to give the deck boards a coating to help stave off weathering damage. I purchased a gal. of Thompson's Weather Seal. After I poured it into my roller tray and started applying it, I was dismayed to discover that it was a water-based product, not the petroleum product that I had used in years past. It was obvious that it was not being absorbed into the wood as the older Thompson's did. I am wondering if they no longer manufacture the earlier product, as I could not find it on their web site. Fortunately, I was able to find a gallon of left-over Thompsons petroleum product the next time I went to our Miss. farm. It was from a project that I had done several years ago. I can't help but believe that the water-based treatment is less effective that the petroleum product which soaks into the wood, rather than sitting on top as a film.
Re: Refinished the Trailer Deck & Added Tail Jacks
Posted: Thu Sep 13, 2012 8:57 am
by outdoors4evr
You will pay dearly for that gallon of Penofin, but it's worth every penny!
I used it on an Arbor 7 years ago and it is still beading and shedding water today. Great Product!