Page 1 of 1

Just another project

Posted: Fri Dec 07, 2012 11:18 pm
by clodhopper
Thought some of you might find this useful so here goes.
2x10 x30" long or longer
6 - 3 inch decking screws
4 - 5/8 x 3 inch carriage bolts w/nuts
Simple to build, actually self explanatory, so I will save you the boring subtitles... :D. It did clear up some space in the shop.
hanger1.JPG
hanger2.JPG

Re: Just another project

Posted: Sat Dec 08, 2012 9:01 am
by David C
:applause: :applause: Very nice and easy

Re: Just another project

Posted: Sat Dec 08, 2012 12:32 pm
by thebigron
Neat, smooth, slick. Hopefully you don't forget where it is when you need it!!! Only thing I might add: "A good place for wingnuts".

Re: Just another project

Posted: Sat Dec 08, 2012 1:40 pm
by RaymondDurban
Very practical and a good storage solution for these odd shaped parts! I like it!
The only better option would be to buy another Cub to store them on! :wink:

Re: Just another project

Posted: Sat Dec 08, 2012 10:13 pm
by clodhopper
RaymondDurban wrote:Very practical and a good storage solution for these odd shaped parts! I like it!
The only better option would be to buy another Cub to store them on! :wink:

Ill take donations!! :tractor: