Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.
Moderator: Team Cub
14 posts • Page 1 of 1
Last May my wife and I bought our first home. I have been hard it remodeling it myself with the help of my dad at times. I have had so much fun with it all and today I was able to finish up installing the kitchen. I made all new cabinets myself and started them in mid september and made the last of them last weekend and today installed the final 3. Still have a bit of trim work to do but nothing serious. Since I teach Woodshop, I thought I would use my skills and make them myself.
New Sink wall
New Island, I removed the wall to open up the room.
Great job, kitchens are tough and once they are done worth the effort.
22 mower 5', grader blade, 189 two way moldboard plow, cultivators ,danco C2 mower,1961 Comet, 1984 BMW 318i
Part of life is falling down, living is getting back up.
Really nice work! Ed
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
Very nicely done! I like that. White Ash with Minwax Special Walnut stain and water borne Polyurethane finish Very nice wide open grain and the stain suits well.
Really nice! Great that you could do the cabinets yourself as I am sure it saved you a bundle of cash. Maybe saved enough for another Cub? I like my logic on the savings, but, I doubt I could "sell" it to my wife if I were in your shoes! Steve K.
Keep momma happy write your own ticket
The wood is RED OAK, Minwax Early American Oil based stain, (had to bring it home from Kansas because Illinois only sells the VOC compliant which I hate), and I sprayed them all with Old Masters Brushing Lacquer. It is a nice oil based Lacquer that goes on nice with a HVLP sprayer. I have been using it for 3 yrs now and really like it, except for the fumes though.
My wife put it all over Facebook and now I have people asking me to make this and that, I don't know if I will ever have an empty list now.
Thanks all, Woodworking is something really enjoy doing, other than piddling with Cubs. Don't know of any other better hobbies to have than the two I have.
Kinda look like White Ash to me because of the really wide grain. Didn't think of red oak at all because it is so nice and light. I haven't been playing in my shop a lot over the last year, but I am now embarking on rebuilding my cabinet shop - new wood floor over the concrete, dust filtration system, dust extraction system (yes, two different concepts), all my air lines are going to sked 40 and the only pvc lines I will have will be the coils. New benches and cabinets for all my power tools. Been something I wanted to do for a long time just never had the energy or the help, now I do. I have a chum who has been helping me with our bathroom renovation - turned into a major project - had the house open to the roof , but it is all buttoned up now. My cabinets upstairs are all red oak with the minwax walnut stain, which is why I thought yours was white ash. With the bathroom I have no choice I have to go to the new VOC Compliant finishes in the house due to allergies ( my daughter has severe ones), so not sure what I am going to do.
Will post pics as soon as I get it done. Still need to make all the doors though.
You do nice work by the way.
Wow ...everything looks great ...and the Farmall towel on the oven door handle gives it the finishing touch!! PERFECT!
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Nice work Jason!
Have you ever tried using concealed type cabinet door hinges vs. the face frame surface mount style? I switched over to the concealed style in my shop back in '05 and have never looked back. They have numerous benefits.
14 posts • Page 1 of 1
Who is online
Users browsing this forum: grumpy and 1 guest