Dedicated snow blade from Cub dozer blade.

Got a project that you are working on that is not a tractor? Maybe a barn to hold your tractors or just fun stuff like woodworking, glass, tools, sheds, gardens, custom implements, etc., this is the place to talk about it.

Moderator: Team Cub

Posts: 37
Joined: Tue Dec 05, 2017 5:03 am
Zip Code: 61201
eBay ID: Greaceandgasoline
Tractors Owned: IH 154 Cub LoBoy 1972

Dedicated snow blade from Cub dozer blade.

Postby Pfranck331 » Wed Dec 20, 2017 6:37 pm

Flipped blade over , added rubber wear edge and 20ga galv extension.

Blade trip stop spring tied back to elivator so when blade trips and sping tension is exceeded blade is lifted ( hydraulics in float mode).
Removed stock under bracket spring.


2 Hillman ps2 springs provide trip resistance.


The old 1/2 " pins with cotter pins were replaced with 1/2" bolts and bronzes bushings.


Blade upright stop is some 5/8 allthread and some bushing washers. The bracket had to be radiused to clear for trip.


The blade brackets themselves were not intended to have opposing upper or lower holes used , the brackets had to be gently persuaded.

User avatar
ricky racer
10+ Years
10+ Years
Posts: 4315
Joined: Wed Sep 12, 2007 8:40 pm
Zip Code: 49120
Circle of Safety: Y
Location: Niles / Buchanan, Michigan

Re: Dedicated snow blade from Cub dozer blade.

Postby ricky racer » Thu Dec 21, 2017 8:47 pm

This modification should make plowing a nicer experience, I know mine did. No more hitting something solid and getting jolted or causing possible damage to your tractor. Below is a link to my modification.

1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub

  • Similar Topics
    Last post

Return to “Projects Forum”

Who is online

Users browsing this forum: tst and 1 guest