Farmall Cub

Hey Gang!

Sounds great! Better yet, I believe it is my Saturday off! God willing I can make it, can I bring anything? I know I'll have a project or two to work on.
Thanks for hosting this!
Hope to see directions soon.
Greg Gardner
"Greg 49" aka "Varmint" per Ed Darowski (Scotty D's Dad)

greg49 wrote:Hey Gang!

Sounds great! Better yet, I believe it is my Saturday off! God willing I can make it, can I bring anything? I know I'll have a project or two to work on.
Thanks for hosting this!
Hope to see directions soon.
Greg Gardner
"Greg 49" aka "Varmint" per Ed Darowski (Scotty D's Dad)

Hey, Varmint, good to see you're on the list. Ed

Aka Varmit is coming and that means other varmits will tag along with him. They travel in groups it seems. Seen them up in New Hampshire at the Power of the Red show this summer. I'll get Jim to post directions and address info. I know how to get there but don't know the exact street number...GREAT!

Don't forget the pictures!!!!!!!

Bigdog wrote:Don't forget the pictures!!!!!!!

Pictures???? Just pictures? I wouldn't be surprised if there are videos...

My father's address is:

470 Bakerville Road
Dartmouth, MA 02748

There is plenty of room for a few cubs and lots of projects inside of the shop and there is spillover room inside of the adjacent barn.

So far, there are two touch control units to rebuild, a clutch to repair, and a broken bolt to remove from a radiator housing.

I'll bring a can of freeze and release. We might be able to get it out.

Greg has two projects but I don't what they are. I do want to try and swap out the short shaft and maybe put the engine in. whoa boy, it is a carcass right now not much on ole' Rusty.

I will be there, I will try to break something before I come so that I have something to work on.

Bob Phillips

spaceghost wrote:I will be there, I will try to break something before I come so that I have something to work on.

Bob Phillips

Bob, haven't you rebroken the flail mower, yet? Ed

ScottyD'sdad wrote:

spaceghost wrote:I will be there, I will try to break something before I come so that I have something to work on.

Bob Phillips

Bob, haven't you rebroken the flail mower, yet? Ed

Well it still cuts grass but I am missing a row of blades now so it leaves stripes on the lawn. I cut for two day in Maine and hit a lot of rocks and other things.
It needs a tune up.

Bob...do you need any blades? Ted's in Fairhaven has them in stock I believe.

spaceghost wrote:

ScottyD'sdad wrote:

spaceghost wrote:I will be there, I will try to break something before I come so that I have something to work on.

Bob Phillips

Bob, haven't you rebroken the flail mower, yet? Ed

Well it still cuts grass but I am missing a row of blades now so it leaves stripes on the lawn. I cut for two day in Maine and hit a lot of rocks and other things.
It needs a tune up.

I expected it to be more broke than that, by now! Ed

Chuckwheat Farm wrote:Bob...do you need any blades? Ted's in Fairhaven has them in stock I believe.

Chris
I have a bag of them so I don't think I need anymore at this point.

Thanks anyway.

How did they go missing??? In hours and hours of pretty rough mowing I am missing one pair of knives.

I will probably bring along the stray 'front end' I have. Need to get the shroud, 'bent' radiator and steering gear apart. The bolster is going on the 64 that's been repaired. I will drag along a couple of carbs too... one needs to be flattened and the other just needs the kit installed.