Page 2 of 2

Re: Stonethrow Projects

Posted: Tue Sep 25, 2012 2:28 pm
by RaymondDurban
danovercash wrote:Last time my Cub squealed, it was a locked up fan bearing!

That's what I suspect as well.

Re: Stonethrow Projects

Posted: Tue Sep 25, 2012 6:15 pm
by Corky's Cub
RaymondDurban wrote:
danovercash wrote:Last time my Cub squealed, it was a locked up fan bearing!

That's what I suspect as well.



Me too...if it was the mains, it woulda just locked up. Also, I would have thought main bearing noise would have been much lower-pitched, or even a knock rather than screeching and squaling....keeping my fingers crossed though! :mrgreen:

Raymond, we're gonna you guys this year!

Corky

Re: Stonethrow Projects

Posted: Fri Sep 28, 2012 1:18 pm
by phildidit
I need help getting my loboy to idle correctly. I need help with the carb/governor/timing adjustments from some of the expeerts, please :mrgreen:

Re: Stonethrow Projects

Posted: Fri Sep 28, 2012 9:05 pm
by Kodiak
Phil,
I'm sure someone will be avalible to get that done.
Can you help me out with 2 touch control rebuilds that will need some guidance and assistance?

Thanks
Ron

Re: Stonethrow Projects

Posted: Fri Sep 28, 2012 9:19 pm
by Barnyard
I have a change in projects. I will still bring the mag to repair the case but the Cub won't be along. Since I will be getting home from Cubarama with two Cubs, there is no reason to unload and reload. I will be bringing my newest Loboy to see if a Cub that ran when parked fifteen years ago will start will start. I have a feeling this will be an easy one.

Also, Harley has developed a charging problem that will need to be traced.

Re: Stonethrow Projects

Posted: Fri Sep 28, 2012 9:52 pm
by Kodiak
I'll try and help on the charging problem, but you know how it goes :!:

Re: Stonethrow Projects

Posted: Sat Sep 29, 2012 4:49 am
by phildidit
Ron, i can help with the TC rebuids. I alked to Robert Luebke and he needs a couple of seals changed in his final drives.

Re: Stonethrow Projects

Posted: Sat Sep 29, 2012 6:26 pm
by John C
Neither of the two Cubs I'm bringing would start last week, so I may need some help turning on the gas :roll:

Re: Stonethrow Projects

Posted: Sun Sep 30, 2012 1:13 pm
by beaconlight
Looks as if we will be busy

Re: Stonethrow Projects

Posted: Sun Sep 30, 2012 1:15 pm
by Mr E
John C wrote:Neither of the two Cubs I'm bringing would start last week, so I may need some help turning on the gas :roll:



:big smile:

Re: Stonethrow Projects

Posted: Sun Sep 30, 2012 7:13 pm
by Rick Spivey
phildidit wrote:I need help getting my loboy to idle correctly. I need help with the carb/governor/timing adjustments from some of the expeerts, please :mrgreen:


I can help with this one. I'lll bring my magic box of tools and parts, as well as a kit.

Re: Stonethrow Projects

Posted: Sun Sep 30, 2012 10:43 pm
by Kodiak
Shaping up to be a busy weekend and the weather is supposed to be good too! (I hope!)

Re: Stonethrow Projects

Posted: Mon Oct 01, 2012 4:47 am
by phildidit
Rick Spivey wrote:
phildidit wrote:I need help getting my loboy to idle correctly. I need help with the carb/governor/timing adjustments from some of the expeerts, please :mrgreen:


I can help with this one. I'lll bring my magic box of tools and parts, as well as a kit.



Thanks Rick. :{_}:

Re: Stonethrow Projects

Posted: Mon Oct 01, 2012 10:26 am
by my59LoBoy
My '77 cub, was hard starting all thru the year, it has been turned up, but died on me a couple weeks ago, new coil, points finished & set, still no go,
it's a push & pull model right now, I bringing her in to Stonethrow, also would need the brakes fixed (no left) and the ole Zenith carb could be a problem.
You guys are the greatest on these ole cubs. See you on Friday.
Dean, the lo-boy throwed a generator belt, staying in the shed, for fall project.
my59loboy

Re: Stonethrow Projects

Posted: Mon Oct 01, 2012 10:35 am
by Former Member
my59LoBoy wrote:My '77 cub, was hard starting all thru the year, it has been turned up, but died on me a couple weeks ago, new coil, points finished & set, still no go,
it's a push & pull model right now, I bringing her in to Stonethrow, also would need the brakes fixed (no left) and the ole Zenith carb could be a problem.
You guys are the greatest on these ole cubs. See you on Friday.
Dean, the lo-boy throwed a generator belt, staying in the shed, for fall project.
my59loboy


I will throw a brake and drum into the truck to make sure we have what you need.