Switch to full style
The new home for CubFest and Tractor show Announcements & Discussions.

Forum rules

ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.

IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
Post a reply

Cubfest Northeast Projects

Tue Sep 11, 2012 5:12 pm

Here is a list of projects for Cubfest NE

1. Complete engine rebuid
2. Magneto rebuild
3. Don McCombs, Larry and Rudi Brake reline
4. Bob Perry's 2 tractors
5. Rudi and Larry right angle drives
6. Berlin engine brace insallation
7. Brad tractor assembly
8. Bob Perry 2 tractors various
Last edited by Cecil on Fri Sep 14, 2012 8:34 pm, edited 5 times in total.

Re: Cubfest Northeast Projects

Tue Sep 11, 2012 5:55 pm

Don has a set of brakes to reline. If anyone else wants to do it, PM me.

Bob

Re: Cubfest Northeast Projects

Tue Sep 11, 2012 6:05 pm

We'll be bringing 1 or 2 Cubs, right now I don't know exactly what we'll be fixing, because I don't know what will be accomplished before then, or what's going to stop working between now and then. But we'll be sure to have enough to keep ourselves busy all day Saturday. Hopefully sons Andy and Kevin will be there, Jimdawg is unable this time.

Re: Cubfest Northeast Projects

Tue Sep 11, 2012 8:06 pm

I am going to bring a Belt Pulley Gear Box for a rebuild. Bill you would recognize it .. it used to be yours :D Probably bring a couple of carbs and I am going to look at how many brakes I need relined :idea: :wink: :D

Re: Cubfest Northeast Projects

Tue Sep 11, 2012 8:16 pm

Rudi wrote:I am going to bring a Belt Pulley Gear Box for a rebuild. ...


Does it still have that loooooong shaft attached? :) :) :)

Bill

Re: Cubfest Northeast Projects

Tue Sep 11, 2012 8:20 pm

Nooooooo! it don't. Wouldn't fit in the Honda if it did :D It is going for a bath next week.

Re: Cubfest Northeast Projects

Wed Sep 12, 2012 6:58 am

Since Rudi is bringing a right angle pulley.... I suppose I should drag along the one I was going to do at his Cubfest :lol: . The one on the Lo Boy flail mower needs a front seal too, but that may have to wait.

Got some brake lining to do too.

Re: Cubfest Northeast Projects

Wed Sep 12, 2012 8:38 pm

I figured I would just come and watch :wink:

Re: Cubfest Northeast Projects

Wed Sep 12, 2012 8:54 pm

Rudi has asked me to do a demo of installation of the engine braces, which I will be glad to do, I will have braces with me.
Berlin

Re: Cubfest Northeast Projects

Wed Sep 12, 2012 9:18 pm

Hopefully after Berlin does the demo I will have a clue :lol: Have had a set for a while just haven't had the courage to try...

Re: Cubfest Northeast Projects

Wed Sep 12, 2012 9:32 pm

scotlem wrote:I figured I would just come and watch :wink:


Something I've never seen: Scott standing still watching !

Re: Cubfest Northeast Projects

Wed Sep 12, 2012 9:46 pm

Yep Bob! Somehow I think he may find something to do :lol:

Re: Cubfest Northeast Projects

Thu Sep 13, 2012 5:38 pm

scotlem wrote:I figured I would just come and watch :wink:

Yeah, right!

Re: Cubfest Northeast Projects

Fri Sep 14, 2012 11:19 am

Don McCombs wrote:
scotlem wrote:I figured I would just come and watch :wink:

Yeah, right!


...and he won't have any tools with him! :shock:

Re: Cubfest Northeast Projects

Fri Sep 14, 2012 7:09 pm

Me and son Andy are planning to bring a yellow low-boy that needs a few things. One is to put a bunch of things back on it, it was dis-assembled for painting. We will re-wire it, re-assemble everything, install the new radiator, it will run but may need some TWEEKING. Anybody seen Scott? (the guy who just stands there and watches with his hands in his pockets)

It sat outside for 15+ years but we had it running in one day in April.

It's getting a snow plow attached, I am painting the plow now but might sand-blast the 2 big springs there.

If son Kevin can come we will bring a 2nd tractor. Don't know yet. But will let you know !
Post a reply