Switch to full style
The new home for CubFest and Tractor show Announcements & Discussions.

Forum rules

ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.

IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
Post a reply

Re: Possible Mini NC Cubfest??

Mon Dec 17, 2012 12:19 pm

If anyone is bringing a tractor, just let me know so I can make sure there is enough space kept clear over the weekend! This is going to be fun! :big smile:

I am heading over to the shop in a few minutes to see if I can find out just WHERE I put that helicoil kit!!! I found the 3/8-16, but not the 5/8-11. I hate getting so forgetful...I do remember putting it somewhere...just can't finish that final puzzle piece!!! :roll:

Re: Possible Mini NC Cubfest??

Mon Dec 17, 2012 12:37 pm

BDFinch wrote:If anyone is bringing a tractor, just let me know so I can make sure there is enough space kept clear over the weekend! This is going to be fun! :big smile:

I am heading over to the shop in a few minutes to see if I can find out just WHERE I put that helicoil kit!!! I found the 3/8-16, but not the 5/8-11. I hate getting so forgetful...I do remember putting it somewhere...just can't finish that final puzzle piece!!! :roll:



I'll be bringing Old Ugly, the Super A.

Al

Re: Possible Mini NC Cubfest??

Mon Dec 17, 2012 12:48 pm

I am not bringing a tractor but I could bring a 5/8 helicoil kit if you cannot find yours.

Re: Possible Mini NC Cubfest??

Mon Dec 17, 2012 3:31 pm

BJ Moretz wrote:I am not bringing a tractor but I could bring a 5/8 helicoil kit if you cannot find yours.

Fantastic! I went to the shop and it turns out the second one I have was for the SA finals and is a 3/4-10, not a 5/8-11. So if you would be so kind and bring yours, that would be great! Thanks and see you there!

Re: Possible Mini NC Cubfest??

Mon Dec 17, 2012 4:19 pm

Will do. I look forward to it !

Re: Possible Mini NC Cubfest??

Mon Dec 17, 2012 6:05 pm

BJ Moretz wrote:Will do. I look forward to it !

Do you have everything or do I need to get the drill and/or bit or anything?

Al

Re: Possible Mini NC Cubfest??

Mon Dec 17, 2012 10:09 pm

Al, maybe I will go out and check my SA to make sure all the mounting holes are good...don't think I looked that closely, actually. This would be a good time to do it if needed. I will have a large drill that I used for my final repairs.

Re: Mini NC Cubfest - Saturday, January 19, 2013

Tue Dec 18, 2012 11:42 am

Al
I should have the complete kit, I will look today to be sure. Might bring your drill with you if you have a favorite.

Re: Mini NC Cubfest - Saturday, January 19, 2013

Wed Dec 26, 2012 12:37 pm

Hi Guys
I do have the complete 5/8-11 helicoil kit. Someone might want to bring an extra 21/32 bit in case we dull mine.

Re: Mini NC Cubfest - Saturday, January 19, 2013

Sun Jan 06, 2013 9:46 pm

A quick update and summary of tasks!

First, a reminder of date and location:
Saturday, January 19, 2013
Browns Auto and Collision
11744 15-501 South
Chapel Hill, NC 27517

These are the folks that expressed an interest in coming:
1 Joel (joel) - SA, flush transmission, cean/rebuild carb, valves adjusted, clutch adjusted
2 Al (Super A) - SA, helicoil implement bolt holes
3 Dale (BDFinch) - '52 Cub, front transmission seal & "55 Cub, find (and eliminate!) mysterious metalic scraping noise under the hood, install my fasthitch
4 Sammy (sammydonnacub) - assist
5 ? (danovercash) - assist
6 Brendan (Brendan In NC) - assist
7 ? (BJ Moretz) - assist
7 ? (buster38) - assist

Anyone else want to come play I mean work?!! Any other tractors? The shop owner said we could have as much space as we need...and it is a large shop! I will be picking up Joel's SA on Wednesday the 16th, and will probably take my 2 cubs over sometime during that week, if not this next weekend. Maybe get a jump on my work. I also plan to sandblast some parts this week, like a seat and post, tool box, and fasthitch depth control lever.

I will have my large drill, but when I looked for that 21/32" drill bit for a spare, couldn't find one, so if anyone else has one for the helicoiling, that would be great.

I will have some beverages and munchies, but for lunch, we will just head over to the nearby establishments. I'm looking forward to this, and really excited to meet more of the "local" folks! :{_}: If you need to reach me, just call at 919-360-7979 (cell).

Re: Mini NC Cubfest - Saturday, January 19, 2013

Sun Jan 06, 2013 9:52 pm

I will see if I can get hold of a bit. Dale, please PM me later this week to remind me.....

Thanks,
Al

Re: Mini NC Cubfest - Saturday, January 19, 2013

Sun Jan 06, 2013 10:27 pm

Super A wrote:Dale, please PM me later this week to remind me.....

Oh YEAH..RIGHT!!! Hey I'm older than you are!!! How do you think I will remember to remind YOU??!! :roll: :lol:

Re: Mini NC Cubfest - Saturday, January 19, 2013

Mon Jan 07, 2013 6:08 am

BDFinch wrote:
Super A wrote:Dale, please PM me later this week to remind me.....

Oh YEAH..RIGHT!!! Hey I'm older than you are!!! How do you think I will remember to remind YOU??!! :roll: :lol:


Ok, somebody remind me...... :D :big afro:

Al

Re: Mini NC Cubfest - Saturday, January 19, 2013

Mon Jan 07, 2013 7:51 pm

Thanks for the update Dale. I'm going to open new post regarding trying to get items online...

Re: Mini NC Cubfest - Saturday, January 19, 2013

Mon Jan 14, 2013 9:32 am

Hey folks! If anyone has any questions, including directions, etc., please call my cell phone: 919-369-7979. Tonnika, the owner's daughter who runs the shop, can't answer any of your questions since she has nothing to do with this gathering, and has a busy shop to run! Sorry I forgot to mention this earlier...she MIGHT forgive me!!! :oops:.
Post a reply