Page 1 of 3
getting ready for the weekend
Posted: Tue Dec 04, 2012 6:32 pm
by Boss Hog
Re: getting ready for the weekend
Posted: Tue Dec 04, 2012 6:51 pm
by billy clay
been busy I see
Re: getting ready for the weekend
Posted: Tue Dec 04, 2012 7:16 pm
by Boss Hog
yep that lo boy will be a high boy by monday
Re: getting ready for the weekend
Posted: Tue Dec 04, 2012 7:16 pm
by Bob Perry
Re: getting ready for the weekend
Posted: Tue Dec 04, 2012 7:17 pm
by Bob Perry
Boss Hog wrote:yep that lo boy will be a high boy by monday
Maybe the caffeine in that stuff is what drives him !
Re: getting ready for the weekend
Posted: Tue Dec 04, 2012 7:21 pm
by Super A
That sign = AWESOME!
Al
Re: getting ready for the weekend
Posted: Tue Dec 04, 2012 8:12 pm
by Yogie
Boss, by the time I get there all that will be left to do is eat nabs and drink Coke.
Clint will be there in time to turn the lights off and button the doors.
Re: getting ready for the weekend
Posted: Tue Dec 04, 2012 8:38 pm
by LeeC
Poor LoBoy. Can't get no respect
Re: getting ready for the weekend
Posted: Tue Dec 04, 2012 9:22 pm
by Clint Carter
Hey dont wish me late, i need all the help i can get to be on time anyway
Re: getting ready for the weekend
Posted: Tue Dec 04, 2012 10:16 pm
by Former Member
Clint, Start time is 5 a.m. You should get there by 9 or ten
Re: getting ready for the weekend
Posted: Wed Dec 05, 2012 3:02 am
by Yogie
Dale Shaw wrote:Clint, Start time is 5 a.m. You should get there by 9 or ten
Takes me 6 hours one way so I'll leave out about 2am as usual, a lot of driving for a one day trip there and back but there's nothing like a day of fun and laughs at the Waller.
Clint, don't wear your Sunday best because Brad's bringing 6 rear tires to change out. You'll be a pro after that.
Re: getting ready for the weekend
Posted: Wed Dec 05, 2012 9:38 am
by Buzzard Wing
Looks like you are getting ready to frame that short fender up near the IH sign?? Both are rare!
When I put the front end back on my Lo Boy I left it with Cub tie rods.... but only the wise would know. I did replace the gear and shaft to bring it up to the newer standards... but left the dot bolts. Don't tell the correct police.
Re: getting ready for the weekend
Posted: Wed Dec 05, 2012 12:09 pm
by Bob Perry
Buzzard Wing wrote:When I put the front end back on my Lo Boy I left it with Cub tie rods.... but only the wise would know. I did replace the gear and shaft to bring it up to the newer standards... but left the dot bolts. Don't tell the correct police.
Re: getting ready for the weekend
Posted: Wed Dec 05, 2012 6:38 pm
by billy clay
will be down this weekend to drop off Boss's latest addition to his cub collection the 64 cub
Re: getting ready for the weekend
Posted: Thu Dec 06, 2012 7:09 pm
by Yogie
Looking forward to seeing you again Billy, bring dad along too.
Boss has a few Woods 42 parts that I need to make my next project complete. Need to start a list to remember what's what.
Not sure but I might need a rear light bracket that mounts to the battery box.
