Forum rules
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
Tool Time
Sun Mar 03, 2013 11:51 am
Finally getting around to this! 
If you were an attendee at DSCF, we can talk tools.
Dale Shaw, is this yours, by chance?
Someone left a 1/2" Craftsman gear wrench and a 1/2 drive extension.
If you check your tool box and find a couple of 1/2" drive sockets like the ones missing here, they might belong to me.
These are my findings at the moment. Could be some more a bit later.
Roy
If you were an attendee at DSCF, we can talk tools.Dale Shaw, is this yours, by chance?
Someone left a 1/2" Craftsman gear wrench and a 1/2 drive extension.
If you check your tool box and find a couple of 1/2" drive sockets like the ones missing here, they might belong to me.
These are my findings at the moment. Could be some more a bit later.
Roy
Re: Tool Time
Sun Mar 03, 2013 12:00 pm
I think the yellow extension matches a certain yellow Lo-Boy. Also wondering what size fits between 9/16 and 5/8 in a Craftsman socket set.
Re: Tool Time
Sun Mar 03, 2013 12:03 pm
Jim Becker wrote:I think the yellow extension matches a certain yellow Lo-Boy. Also wondering what size fits between 9/16 and 5/8 in a Craftsman socket set.
I think you are probably correct on the yellow one.
The sockets are not in order. Should have arranged them before I snapped the pic.
Re: Tool Time
Sun Mar 03, 2013 1:06 pm
Yes the extension is Dirtyreds.
Re: Tool Time
Sun Mar 03, 2013 1:38 pm
Yep Roy, the "make it or break it" pipe wrench is mine. It is a 24" wrench and when you slide a 2" black pipe, 4 to 6 foot long over that handle, you will either break it loose, or break it in half.
When I worked in the oil patch in OK after high school, we had a 60" wrench and we used a 20' section of 4" pipe for a cheater.
Took several of us on that big surface pipe, cant remember if it was 12" or 18" pipe.
When I worked in the oil patch in OK after high school, we had a 60" wrench and we used a 20' section of 4" pipe for a cheater.
Took several of us on that big surface pipe, cant remember if it was 12" or 18" pipe.
Re: Tool Time
Mon Mar 04, 2013 6:01 am
Mr. Roy the 1/2" wrench is mine. I am also missing a Craftsman ajustable wrench.
I have your 3/8" Craftsman wrench with the red paint. I also have a set of red handled pliers that are made in China that looks just like my Craftsman set that has the red rubber grips on the handle.
That is all I have that is not mine and I think, all I am missing.
I have your 3/8" Craftsman wrench with the red paint. I also have a set of red handled pliers that are made in China that looks just like my Craftsman set that has the red rubber grips on the handle.
That is all I have that is not mine and I think, all I am missing.
Re: Tool Time
Mon Mar 04, 2013 5:10 pm
extension is mine and the red handled might be mine i got somebodys craftsman srewdriver.you know this means we need to have another fest to swap tools
Re: Tool Time
Mon Mar 04, 2013 5:32 pm
dirtyred wrote:extension is mine and the red handled might be mine i got somebodys craftsman srewdriver.you know this means we need to have another fest to swap tools
Hey, do you think a Mini-Fest is in order?
Re: Tool Time
Mon Mar 04, 2013 5:41 pm
how bout a minifest in april? say Alapahoochee? and bring ole HeeHaw with u!
Re: Tool Time
Mon Mar 04, 2013 8:41 pm
Who is ole HeeHaw?