Barnyard Bash Projects

The new home for CubFest and Tractor show Announcements & Discussions.

Moderator: Team Cub

Forum rules
ALL CubFest discussion posted in other forums will be moved to this forum without advance notice.

IMPORTANT NOTE: CubFest organizers -- Notify a TeamCub member or the ADMIN (Dennis) to "Sticky" your event announcement in this forum.
User avatar
Barnyard
Team Cub
Team Cub
Posts: 21078
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Barnyard Bash Projects

Postby Barnyard » Wed Apr 27, 2016 8:31 am

The Bash will be upon us very soon. Let us know what projects we can expect. Last year we had the shop busy both days. I'd like to see that place buzzing again. :D
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

User avatar
BIGHOSS
10+ Years
10+ Years
Posts: 1662
Joined: Tue Jul 18, 2006 9:55 pm
Zip Code: 37087
Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower

1974 Cub S/N 244814
w/59 Woods Mower

Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog

and a Palomino Mare named GIGI
Circle of Safety: Y
Location: TN, Lebanon

Re: Barnyard Bash Projects

Postby BIGHOSS » Wed Apr 27, 2016 9:46 am

Bill, I am bringing a friends Zenith carb from a late model cub. Needs the manifold studs helicoiled and cleaned.
"Courage is being scared to death-but saddling up anyway".......John Wayne

cubbrian
10+ Years
10+ Years
Posts: 833
Joined: Sun Apr 08, 2007 7:47 pm
Zip Code: 47631
Tractors Owned: 1955 Cub w/9 different 1 point implements
1948 Cub
1948 McCormick W-6
1949 H
1949 M
1961 560 w/ 412 fast hitch plow
1966 140
1973 666
Allis Chalmers C w/sickle mower
Case 400
Economy 14 hp tractor
Location: IN, New Harmony

Re: Barnyard Bash Projects

Postby cubbrian » Wed Apr 27, 2016 11:34 am

I am planning on bringing a hydraulic pump for a rebuild and I would like to free up a sticky governor arm on my 74 cub.

Bob McCarty
Team Cub
Team Cub
Posts: 8721
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Barnyard Bash Projects

Postby Bob McCarty » Wed Apr 27, 2016 6:02 pm

Ron, I'll bring a 1/4-20 helicoil kit. 5 minute job.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Mr E
10+ Years
10+ Years
Posts: 5732
Joined: Mon Jul 30, 2007 11:48 am
Zip Code: 32460
eBay ID: noles1432460
Circle of Safety: Y
Location: FL, Sneads

Re: Barnyard Bash Projects

Postby Mr E » Wed Apr 27, 2016 7:09 pm

Bob McCarty wrote:Ron, I'll bring a 1/4-20 helicoil kit. 5 minute job.

Bob


I want to help you, Mr. Bob!!
In the middle of every difficulty lies opportunity. - Albert Einstein

Image. Circle of Safety

Roy Edenfield
Deep South CubFest #10
February 15 & 16, 2019

User avatar
BIGHOSS
10+ Years
10+ Years
Posts: 1662
Joined: Tue Jul 18, 2006 9:55 pm
Zip Code: 37087
Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower

1974 Cub S/N 244814
w/59 Woods Mower

Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog

and a Palomino Mare named GIGI
Circle of Safety: Y
Location: TN, Lebanon

Re: Barnyard Bash Projects

Postby BIGHOSS » Wed Apr 27, 2016 8:39 pm

Maybe we can expand the time to 10 minutes. I am also bringing the bowl gasket. 8) 8)
"Courage is being scared to death-but saddling up anyway".......John Wayne

User avatar
Mr E
10+ Years
10+ Years
Posts: 5732
Joined: Mon Jul 30, 2007 11:48 am
Zip Code: 32460
eBay ID: noles1432460
Circle of Safety: Y
Location: FL, Sneads

Re: Barnyard Bash Projects

Postby Mr E » Wed Apr 27, 2016 8:46 pm

BIGHOSS wrote:Maybe we can expand the time to 10 minutes. I am also bringing the bowl gasket. 8) 8)


It will take longer than that for Steve and I to catch up on things.
In the middle of every difficulty lies opportunity. - Albert Einstein

Image. Circle of Safety

Roy Edenfield
Deep South CubFest #10
February 15 & 16, 2019

CharlieK
10+ Years
10+ Years
Posts: 364
Joined: Sun Apr 10, 2005 9:25 pm
Location: bullitt county, kentucky

Re: Barnyard Bash Projects

Postby CharlieK » Thu Apr 28, 2016 6:35 am

I'll be subscribed to that also :{_}:
get er done; life is good

User avatar
BIGHOSS
10+ Years
10+ Years
Posts: 1662
Joined: Tue Jul 18, 2006 9:55 pm
Zip Code: 37087
Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower

1974 Cub S/N 244814
w/59 Woods Mower

Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog

and a Palomino Mare named GIGI
Circle of Safety: Y
Location: TN, Lebanon

Re: Barnyard Bash Projects

Postby BIGHOSS » Thu Apr 28, 2016 8:14 am

Yeah, it was fun this week as we were standing around eating doughnuts, drinking coffee and watching Steve work on my cubs.
"Courage is being scared to death-but saddling up anyway".......John Wayne

User avatar
Don B.
Cub Star
Cub Star
Posts: 128
Joined: Thu Jul 02, 2015 12:02 pm
Zip Code: 25314
Tractors Owned: 1951 Cub
1948 Cub
Circle of Safety: Y
Location: Charleston, WV

Re: Barnyard Bash Projects

Postby Don B. » Thu Apr 28, 2016 12:30 pm

I'd really appreciate help with some basics like replacing the points and condenser, checking the timing, and adjusting the valves.
And since i've not yet done it, I know that I really need to check/service the fan hub.
I don't know how much time we would have, but I need to replace the seals in my final drives, too.
Anything I can learn and/or do would be awesome!
Looking forward to it.
Circle of Safety

User avatar
clintmo
Cub Star!!
Cub Star!!
Posts: 376
Joined: Thu Apr 17, 2014 9:54 pm
Zip Code: 26033
Tractors Owned: 49 Cub
55 Cub
Circle of Safety: Y
Location: Cameron, WV

Re: Barnyard Bash Projects

Postby clintmo » Thu Apr 28, 2016 1:06 pm

I plan on bringing the '57 that I picked up last Spring. I got it running but that's about all I did with it. I want to get it rewired and rebuild the touch control, put a new fuel line on it, basically just go over the whole thing. Also, the bottom screws for the dog legs broke off in the bolster. I believe some of you have experience fixing that, so maybe we can tackle that too. Just want to get it in working shape so I can put it to use.

Can't wait!
Clint

User avatar
Steve-N-Tn
5+ Years
5+ Years
Posts: 244
Joined: Sun Feb 27, 2011 9:14 pm
Zip Code: 37090
Tractors Owned: 1953 Farmall Super M
1948 Farmall H
!949 Farmall C
1947 Cub
1950 Cub
1951 Cub
1948 Ford 8N
1949 Ford 8N
1952 Ford 8N
1953 Ford Jubilee
1950 John Deere G
Circle of Safety: Y
Location: Lebanon, Tn 37090

Re: Barnyard Bash Projects

Postby Steve-N-Tn » Thu May 05, 2016 7:19 pm

Bill last I talked to Stalkcutter, he was planning to bring one of his cubs. Has the threads stripped out of one of the implement bolt holes on the torque tube. Believe he wanted us to look it over to see if there were other things that needed to be worked on. Haven't heard from him since our Tractor Club meeting this month but at least that was the plan! Stalkcutter (Bill) did I get this right?

User avatar
Barnyard
Team Cub
Team Cub
Posts: 21078
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: Barnyard Bash Projects

Postby Barnyard » Thu May 05, 2016 9:47 pm

Steve, tell him to bring it on.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

User avatar
Stalkcutter
Cub Star
Cub Star
Posts: 108
Joined: Thu Mar 05, 2015 12:45 pm
Zip Code: 37143
Circle of Safety: Y

Re: Barnyard Bash Projects

Postby Stalkcutter » Fri May 06, 2016 10:06 pm

Yep, Steve is correct, I have a stripped out equipment hole in the torque tube. I purchased a 5/8-11 Helicoil kit from McMaster Carr and will bring it to the Bash. Do I need to bring a drill?
I also need help determining if the cub is charging or not. Electrics is not my strong point and maybe someone at the Bash can do the proper test to figure it out.

Thanks Barnyard!

Stalkcutter
Image
Chapter 9 TN Circle of Safety

User avatar
Barnyard
Team Cub
Team Cub
Posts: 21078
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: Barnyard Bash Projects

Postby Barnyard » Fri May 06, 2016 10:53 pm

I have the drill you need to use. There will also be a couple of electrical pros on hand also.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety


  • Similar Topics
    Replies
    Views
    Last post

Return to “CubFest and Tractor Show Announcements & Discussions”

Who is online

Users browsing this forum: No registered users and 1 guest