Guys:
I am looking at a hand held Stewart Warner Model 757-W RPM Guage.
It looks fine and works well, but there is a problem....
.
Are these tips replaceable, or should I be looking at bidding on another example..
I gotta know shortly... bidding ends tonight..
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Stewart Warner Model 757-W RPM Guage
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Stewart Warner Model 757-W RPM Guage
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Rudi, I'm positive that the tip is replaceable.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
BD:
K, what would be a fair price to pay for one... JB I know... you got a steal... I am hoping....
Any idea where to find the tips?
I have been searching the net for Stewart Warner Tachometers.. but not much luck so far
K, what would be a fair price to pay for one... JB I know... you got a steal... I am hoping....
Any idea where to find the tips?
I have been searching the net for Stewart Warner Tachometers.. but not much luck so far
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Go to http://www.mcmaster.com/ and type in RPM in the search field. When that returns, click on "RPM Dial Tachometer" I don't know whether the replacement tips, item 1416T3 will fit your tach or not. But for $4.69, it is almost cheaper to order them and toss out if they don't fit than to try to find out otherwise.
Unfortunately, they don't identify the supplier of their tach.
Or, you can look here for the S-W part number. http://www.stewartwarner.com/Catalog/tachhand.html and here for a distributor.
http://www.stewartwarner.com/Contact/dist-Canada.html
Unfortunately, they don't identify the supplier of their tach.
Or, you can look here for the S-W part number. http://www.stewartwarner.com/Catalog/tachhand.html and here for a distributor.
http://www.stewartwarner.com/Contact/dist-Canada.html
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Rudi, those origianlly came with 3 interchangeable tips. one ended in a pointed > ao you could put the point in the recess of the end of a shaft such as the cub pto. Second tip was inverted < so it could be used on a pointed shat. 3rd one was just a rubber sleeve that allowed the used of a small inlcuded extension. Doubth that they are still available, but would think that with a little searching through hardware stores and a little cerativity, something could be made to work.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
- johnbron
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
Rudi I think I would pass on that auction. Have you seen this one from Canada??, I think it would be a better deal so far. http://www.skweezer.net/s.aspx/2/cgi.eb ... dZViewItem
BE PATIENT!! Wait for the better deal. I searched for 3-months before I latched on to My GOOD deal. Also SW still makes the same tach so parts must be available.
BE PATIENT!! Wait for the better deal. I searched for 3-months before I latched on to My GOOD deal. Also SW still makes the same tach so parts must be available.
Then came Bronson
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Well:
Looks like I done pretty good. Almost got sniped by $.50... last 40 secs, I upped to $32.00 and I got it for $30.99US..
Not too shabby. Now all I got to do is to figure out the best way to get it here without having to pay duty.... it is over the limit by $0.99.....
Oooops.
anyways, here it is :Stewart Warner Model 757-W Tachometer.
Jim, I guess next stop once it gets here is McMaster-Carr.. thanks for the info guys.. ej thanks for the confirmation.
Looks like I done pretty good. Almost got sniped by $.50... last 40 secs, I upped to $32.00 and I got it for $30.99US..
Not too shabby. Now all I got to do is to figure out the best way to get it here without having to pay duty.... it is over the limit by $0.99.....
Oooops.
anyways, here it is :Stewart Warner Model 757-W Tachometer.
Jim, I guess next stop once it gets here is McMaster-Carr.. thanks for the info guys.. ej thanks for the confirmation.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
JB:
I have that one on watch, but I have been trying to buy one for quite a while. Whenever I remember to search for it. Over the last year I guess I have missed a bunch... most have gone for $50.00 to $75.00US.. was just reminded of one today.. $75.00 it went for..
I don't mind having to get the tips... at least it appears to be a pretty good one.
I have that one on watch, but I have been trying to buy one for quite a while. Whenever I remember to search for it. Over the last year I guess I have missed a bunch... most have gone for $50.00 to $75.00US.. was just reminded of one today.. $75.00 it went for..
I don't mind having to get the tips... at least it appears to be a pretty good one.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 10 guests