Wed Apr 05, 2006 6:08 pm
I have a wheelhorse lawn tractor and was just thinking about a different exhaust. Is there a place that sells exhaust stacks like the cub but smaller for lawn tractors
Thanks for the replys
Wed Apr 05, 2006 6:37 pm
The exhaust on the Cub is nothing more than pipe. Take the exhaust from the Wheelhorse to the "Pipe Store"
and buy a length of pipe to match.
Wed Apr 05, 2006 6:48 pm
Scotty, ifn my memory serves me right, I THINK that NAPA has them or will order them, I think that's where we got our exhaust for our wheelhorse...... (many many years ago)
Wed Apr 05, 2006 6:54 pm
If you're looking for a vertical muffler try http://www.smallengineparts.com
and see what they have available.
Wed Apr 05, 2006 7:30 pm
yes im looking for a vertical muffler. not the pipe.
Wed Apr 05, 2006 7:45 pm
With a couple of fittings you could easily plumb up a vertical exhaust on just about anything.
Wed Apr 05, 2006 7:53 pm
i would just like to know where i can find a muffler like on the cub. kind of like "Scott C's" cub cadet from the main site gallery
Fri Apr 07, 2006 7:31 pm
Scotty, is this kinda what you is lookin for
EPay # 8053211867
Fri Apr 07, 2006 9:18 pm
When the Cub Cadet original mufflers wear out I replace them with a universal muffler. hanging on the wall, from the autoparts store.
The exhaust pipe, a nipple and lock nut, plus an elbow and a shorter nipple is purchased from the local hardware store.
Fri Apr 07, 2006 10:28 pm
Some people use the cross mount muffler (from the exhaust port on the left across the front of the engine to exit on the right) used on some models of the 10-12-14 hp Cub Cadets as the muffler for a stack exhaust. These are available from Cub Cadet dealerl for about $27. The muffler is about the size of a Cub muffler, with a side inlet and a short, straight , centered, outlet. There is one on eBay if you want to see what it looks like
http://cgi.ebay.com/MUFFLER-FITS-CUB-CA ... dZViewItem
All the pipe fittings in the picture do not come with the new muffler.
Sat Apr 08, 2006 5:32 pm
Scotty, check with your local NAPA, they will have them, or would get them, ours has something just like the one that Paul posted, just in case you don't have a cadet dealer close by....
Fri Apr 21, 2006 5:15 am
Hey Scotty...Brian Miller in Columbia, MO (573) 875-4033 sells a SUPER NICE custom exhaust pipe and brace (about $25.00) for Kohler engines that a standard Cub Cadet style muffler can be attached to.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.