Farmall Cub

I am not a painter I have the wagon primed right now it says to wait 24hrs for the next coat. I ran extra acetone in it and it is going to get 2hrs before I put the color on it! I thought I would have it primed by noon NOT But it is suposed to rain tonite and I do not want it to rain on the primer. I had to paint it in the yard becuse I cannot get any paint in dancers hay. Oh well wild bill's gettin' R done


Just a bunch of parts this morning



Well ended up with one run in the primer. My back is sore. 3/4 gallon of primer 1 gallon red paint. I thought one used more primer than paint Hopfully I can get it mounted on the running gear without scraching it. Ran out of wire brush cups and paint didn't get the grain door done or the hardware.




See I told you I could not paint I went through two cuped wire wheels today boy I hate painting. I think I am wearing as much as I put on! I have never used sprayer before went to harbor freight yesterday and bought a HLV gun. Wow is my back sore Well ended up with one run in the paint wher I hit the tie strap holding up the panels.




Thanks Ron Up here 1 2x12x10 was the same price as 2- 2x6x10's and I think 2- 2x8x10's will finish the floor. I will let you know. I was just thinking less planking = less joints for grain to fall through.

Billy

Good job Cowboy!

That is just great Billy, don't overtax that poor ole back, keep it supple, but continue the good work, that is going to look so good behind your Cub even if it will dwarf it a bit?
Look forward to seeing the photos of them together.
And all in such short time!
Pat

Billy you shore made that look nice. A big tank would have been nice
to put that in.

Man you one busy little beaver. with that speed Ralph better look out.

Bill

Thanks Bigdog I'am still not shure what I am going to do with it but I like it

Hi Pat I am suprised I feel pretty good this morning. Sholders and arms are a little sore. My back feels better than usuall. I got the Cd thursday but haven't looked at it yet been busy outside

Hi Mac Ron is going to do his by making a tempory "tank" with plastic sheeting. I was just in a hurry agin

Hi Bill how it going Ralph has no compedition from me. I had to get on and hit it hard or it will be parts till forever. Gotta get it right the first time if I don't I will let it slide and just use it. I took the lid off paint can and said wow thats RED I like it

Billy

Hey Billy...I can't help but see your GREAT red wagon becoming a Hay Ride wagon for parades and Fall punkin' gatherin'!!! I'm even invisioning a side-hinged "trap door" on the back panel for easy access for "small paraders" or an RV style aluminum ladder mounted on the back panel (that way you can still use it as a grain wagon too) SOoooo many possibilities!!!

Looks Great Billy!

Chad

looking good you definitely are moving faster than me
Ron

Hey Country how's it goin I am going to leave the grain doors off make a step and a swinging gate for the back.

Thanks Chad

Hi Ron before you put yours together measure the with of the box and the with of the ears on the running gear. Found out last nite the box was 1.5 inches narower than the ears. So one of yours is probally too wide. I am going to torch the ears off and move them in tommrow. What a job burshing it down I sholud have done like you plan and make a electrolis pad. Knocked off a valve stem with the wire wheel on the body grinder so now its tim for a tube.

Billy

WOW!! That's looking great, Billy. You should bring it to Cubfest, just put the Lister in ther back and drive on down! It really does look great, take it easy on the back you only got one!

Ron W.

Thanks Ron

How are you doing Things are going ok up here. Got the yard all riped up. I think I am ready to seed it. I hope to have the wagon about done today. Got the engine plate for my lister yeaterday. So many projects I do not know where to start Computer is all messed up been on and off line for the last week.


Billy

Billy,
I got too many projects too I did manage to get the garden all taken care of this weekend. I got my disc setup working and really ripped it up well. I posted some pictures for Rudi in the "need a lift"
thread. See ya at Cubfest!

Ron W.