This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Exhaust lift manifold lower bowl

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
Phillip W. Lenke
10+ Years
10+ Years
Posts: 1484
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Exhaust lift manifold lower bowl

Postby Phillip W. Lenke » Tue Jul 18, 2006 8:46 am

Fellows. I have been searching for lower bowls for the mainfold pressure vave. They are either broken or soon to be. This being said, I am hoping to machine a few up. Mainly for my use. If I can, I may make a few available to forum members . Not sure of the time or cost yet. I am planning to draw it up and cnc machine one out of cold roll or P-20 steel , then get it ceramic coated. This has been used for exhaust on tractors and dragsters(Jet hot.com). Suppose to be able to handle the heat , water and the gases. we'll see. But figure it will out last all of us.
Being a Patternmaker/Model Maker by Trade , I have mulled over the casting part, but, by the time I find a cast shop and make my patterns. It would be better to machine them. Let me know how much iterest there is for these .
Phil
"Work Hard ,Play Often,Care Always"
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Cub-Bud
Team Cub Guide
Team Cub Guide
Posts: 3544
Joined: Sun Feb 02, 2003 6:30 pm
Zip Code: 38658
eBay ID: Cub-Bud
Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
Circle of Safety: Y
Location: MS, Pope

Postby Cub-Bud » Tue Jul 18, 2006 8:53 am

Phil,

Put me down on the list, assuming the cost will be affordable. :wink:
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"

Greg Norman
Top
Phillip W. Lenke
10+ Years
10+ Years
Posts: 1484
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Postby Phillip W. Lenke » Tue Jul 18, 2006 9:15 am

Please put amounts down. I may see if we can run them through the shop.
Phil
"Work Hard ,Play Often,Care Always"
Top
User avatar
Jeff Silvey
Team Cub Mentor
Team Cub Mentor
Posts: 4910
Joined: Tue Jun 07, 2005 2:30 pm
Zip Code: 46055
Tractors Owned: -
1950 Demo,1956 w/ FH, 1959 w 59" mower,
Cub L-54 Blade,152 Plow
189 plow, LF 194 Plow, Woods 42" Mower,
Choremaster Garden tractors & Implements
Antique Gas engines
Circle of Safety: Y
Location: IN, McCordsville

Postby Jeff Silvey » Tue Jul 18, 2006 12:07 pm

Could you put a pic on the forum :?:
Jeff
In my line of work
" EVERYBODY GOES HOME THE NEXT MORNING"
Top
Phillip W. Lenke
10+ Years
10+ Years
Posts: 1484
Joined: Wed May 25, 2005 1:21 pm
Zip Code: 43449

Postby Phillip W. Lenke » Fri Jul 21, 2006 12:03 pm

as soon as I get one machined I will post a picture.
Phil
"Work Hard ,Play Often,Care Always"
Top
Post Reply

Return to “Other Tractors and Machinery”

Who is online

Users browsing this forum: No registered users and 9 guests