Page 1 of 1
Way off topic - washing machine
Posted: Thu Jan 22, 2004 3:47 pm
by Bigdog
Anybody familiar with removing the tub from a washing machine so I can replace a leaking seal? It is a Speed Queen Model AA5421 and as near as I can tell, the seal where the tub mounts to the hub on the transmission shaft has a slow leak. I have located a hub seal kit but I'm not sure where to start dis-assembly.
Posted: Thu Jan 22, 2004 5:01 pm
by Lurker Carl
Posted: Thu Jan 22, 2004 5:08 pm
by Lurker Carl
PS: Replace the drive belt and water hoses while you've got it apart. See ya!
Posted: Thu Jan 22, 2004 5:52 pm
by Bigdog
Carl - Thanks! That was the information I needed!
There's another free cub ride in it for you at the next Cubarama.
Posted: Fri Jan 23, 2004 10:40 pm
by George Willer
Hey, Sonny,
How long did it take for this problem to show up? Your Grandmaw's Speed Queens have given at least 20 years of fairly trouble free service. I did replace an internal hose maybe 5 years ago. Built like a Cub!
Posted: Sat Jan 24, 2004 10:55 am
by Bigdog
I think it's a 1990 model. Not too bad!