Sold my Cub, Need info on 300U

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Moderator: Team Cub

Sold my Cub, Need info on 300U

Postby John Dinwiddie » Sat Aug 14, 2004 4:46 pm

I need a more modern tractor than my old Cub. I would appreciate any comparison of a 300U to the old 600 series Fords. Tractor I am looking at has TA. Any common quirks in these old IH's? where theyoriginally equiped with 3pt hitch? Thanks in advance
John
John Dinwiddie
 
Posts: 18
Joined: Wed Mar 12, 2003 8:51 pm
Location: Middle Tennessee

Postby Bigdog » Sat Aug 14, 2004 7:40 pm

John, I believe the 300 would have had a 2 point fast hitch rather than a 3 point. The TA on these older ones can be a source of problems but rebuild kits and rebuilt units are available. I also believe the steering box was a weak spot on the 300U's but that might be only the ones with power steering, I can't remember for sure. If the tractor has seen loader duty, look at it closely. I'm sure Jim B. or Mike S. can enlighten you much more than I can on this.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23786
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Postby George Willer » Sat Aug 14, 2004 10:01 pm

John,

Maybe it's because I'm partial to Cubs, but I would recommend against a 300-U. I had a good running one with good rubber and a good TA. It didn't have PS and steered so bad that I didn't use it. I traded it even for a non-running project Cub.

It was a much heavier and stouter tractor than my Ford 641. The Ford is more useful.

Image
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce
User avatar
George Willer
Cub Pro
Cub Pro
 
Posts: 7011
Joined: Sun Feb 02, 2003 9:36 pm
Location: OHIO, Fremont
Zip Code: 43420
Circle of Safety Award
Circle of Safety: Y

Postby Jim Becker » Sat Aug 14, 2004 10:02 pm

I haven't had any first--hande with a 300U, but I would look at the same places BD mentioned.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11253
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y


Return to Other Tractors and Machinery

Who is online

Users browsing this forum: No registered users and 1 guest