This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Valve Job
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1
- Joined: Sun Feb 20, 2011 5:43 pm
- Zip Code: 02050
Valve Job
'54 Farmall Cub. Poor compression. Suspect it needs a valve job. I have no prior major engine repair experience. Once the head is removed and the valves replaced/or ground to tolerance, will the engine need to be retimed after the head is replaced?
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Re: Valve Job
As long as the governor has not been removed - re-timing will not be necessary. Just set the valve lash.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 16 guests