Fri May 13, 2011 9:51 am
Hey guys...got a new JD 750 and I was just wondering what the proper method is for checking the transmission/hydraulic oil level? Do I thread the disptick back down and then check it? Or do I place the dipstick back into the fill opening (without threading it down) and check it?
I have the owner's manual, and have yet been able to find this answer, though I've been told it's there?
Thanks in advance.
Sat May 14, 2011 5:47 am
It's my understanding that you just place the dipstick back down until it touches the case. Don't thread it in.
Sat May 14, 2011 9:46 am
Bigdog wrote:It's my understanding that you just place the dipstick back down until it touches the case. Don't thread it in.
I just re-read the entire operator's manual cover to cover, and yes....you are correct Bigdog. I finally found it mentioned....just place it on the threads to check the level.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.