I made a call to identify some plates I have to Burch the other day. I wanted to share the information with others. This is not an all inclusive list, just what I had identified. They were exceptionally nice over the phone. These are for their older series planters.
* MI = Medium
* SI = Small
954-2 A - SOYBEAN
950 - MI - Round Corn Medium
981 -MI - Flat Corn Medium
949-SI - Round Corn Small (Popcorn ?)
R952I - Sorghum / Milo
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Burch Plow Works Evansville, IN Planter Plates
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
JoeB
- 10+ Years
- Posts: 272
- Joined: Fri Apr 03, 2009 11:37 pm
- Zip Code: 00000
-
Jeanette
- 5+ Years
- Posts: 1
- Joined: Tue Dec 08, 2015 6:20 pm
- Zip Code: 32530
Re: Burch Plow Works Evansville, IN Planter Plates
I know NOTHING about tractors, plows, and farming. I did purchase 14 items yesterday that were imprinted BURCH PLOW WORKS. I am trying to identify them. I believe they are seed discs (?). They are very rusted, but otherwise intact with no broken spokes, etc.
From a previous post I gathered that the two marked 949MI is a Round Corn Medium plate.
There are two each marked 49MI, and 951MI. Four discs are marked 983MI.
There are also four pieces that are smaller, marked BURCH PLOW WORKS, and marked P4.
I have "googled" the information, and found not much more than the previous post in this thread.
Are these still in use? Can anyone help me identify them?
From a previous post I gathered that the two marked 949MI is a Round Corn Medium plate.
There are two each marked 49MI, and 951MI. Four discs are marked 983MI.
There are also four pieces that are smaller, marked BURCH PLOW WORKS, and marked P4.
I have "googled" the information, and found not much more than the previous post in this thread.
Are these still in use? Can anyone help me identify them?
-
Don McCombs
- Team Cub Mentor
- Posts: 17477
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Burch Plow Works Evansville, IN Planter Plates
Don McCombs
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
-
Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
-
Greg2016
- 5+ Years
- Posts: 1
- Joined: Mon Jun 13, 2016 4:15 am
- Zip Code: 47711
Re: Burch Plow Works Evansville, IN Planter Plates
Hi Guys!
Burch still makes complete planters and spare parts. You can email them at burchmanuf@aol.com.
Regards,
Greg
Burch still makes complete planters and spare parts. You can email them at burchmanuf@aol.com.
Regards,
Greg
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 11 guests
