All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Aug 12, 2011 7:39 pm
I thought I check here before I mess something up, Well I drain the transmission in my 1972 IH 140 tractor, I was set to put 80/90 wt. gear lube back in with some Lucas oil. But I wanted to check my owners manual to see how much lube to put back in. Now here's the problem my owners manual say's to use Hytran, but my nearest IH dealer is about 180 miles round trip away, & I already drain the transmission, Is it ok to use the 80/90wt. gear oil? Thanks Dave F. ( Oh by the way the serail # of the tractor is 47944 if this helps )
Fri Aug 12, 2011 8:24 pm
Actually, you closest CaseIH dealer is in Little Washington. But, any 90wt or 80/90wt should do fine.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.