Old engine

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Old engine

Postby Bus Driver » Thu Sep 22, 2011 7:08 am

At the shows I see the hit-and-miss engines, but never have owned nor operated one of them. I remember a feed mill with an engine out back. The mill had been converted to electric motors and I never saw the engine in use. But a couple of people do remember it being the power source for the mill. They say that a bulb of some sort on the engine was heated with a blowtorch and then someone would stand on the spoke of the flywheel to get it rotating. Anyone have an idea about the engine? Gasoline? Kerosene? Diesel? I suspect that it was kerosene, spark ignited, and 15 to 20 hp. But others are much more knowledgeable than am I. Give me your best guess.
Luck favors those who are prepared
User avatar
Bus Driver
Team Cub Mentor
Team Cub Mentor
 
Posts: 2620
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: Old engine

Postby Bigdog » Thu Sep 22, 2011 9:48 am

I imagine it would be one of the "hot bulb" engines that were very popular in Europe. The would run on virtually any fuel. Check them out on wikipedia or just google hot bulb engines for a lot of information.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23814
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Re: Old engine

Postby BigBill » Mon Nov 07, 2011 12:05 pm

Sorry you brought back memories of my first job rebuilding machines.

When i first started rebuilding machines we had a similiar designed machine come in from a company who made nails in canada these were cold forming headers. They had big flywheels and connecting rods and were the piston would be it had a slide. It would draw in the round stock and on the so called compression stroke it would cold form a nail and head at the saametime. These reminded me of the old hit-miss engines. We scraped in new bronze plate bearings and i did the lube system. Before they had castiron for bearing ways with a drip oil lube system. The later ones had steel plates for beaing ways. We rebuilt them all.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
BigBill
501 Club
501 Club
 
Posts: 5632
Joined: Sat Jul 22, 2006 5:02 pm
Location: in northern usa
Zip Code: 00000


Return to Other Tractors and Machinery

Who is online

Users browsing this forum: No registered users and 2 guests