Farmall Cub

Link below. This is on the Garden Tractor web site.

http://gardentractortalk.com/f93-garden ... made-9473/

That is some nice stuff on there!!!! thanks; sonny

Nice stuff there. I made my own ripper using the single tooth ripper from TSC i made the 3pt hitch to fit my int154 cub. I been doing test drainage trenches with it to see were they could be best used with curtain drains and drain pipes. One single trench stopped the water completely so these little tools work great.

Here are photos of my Gannon Earthcavator (originally found with Sears 3-point hitch). I converted it to fit a sleeve hitch and restored it to fit my JD 140 H3. Gannon Earthcavators have the ripper teeth, and when the vertical lever is pulled forward, the implement can be used as a ripper (with the teeth straight down) or back blade grader (pushed in reverse, as shown in the bottom photo), or as a front blade grader (pulled forward as shown in the upper photo). These are very rare to come across, and restored will sell for about $500.00 ...'Country'