Farmall Cub

I had a member of our tractor club (out of work) needing gas money, so I gave him what he needed for these. Have no idea what they are, I figure they might make neat flower pot holders??

They are the same thing, but 2 different sizes.

Here they are

Belt pulleys off a power unit?

Looks like flower pot holders to me!

some sort of wheel/center adaptor?

sgtbull wrote:some sort of wheel/center adaptor?

My thoughts too.

I would guess different size flat belt pulleys. They mount to a common what ever and give different speeds at the same governed engine speed. That is my guess.
I ASSUME that both pictures are of the same object from different sides.

Yes Bill. Both sides of each part. the center hole and small flange on each are the same. The large ends are 2 different sizes. I will have to look for part #s I guess.

looks like a hub off a skidder to me

those are hub / wheel adapters

After some research, we found that they are....

High carbon steel water pipe flanges. The small one is 3.5" to 8" the larger is 3.5" to 12". Made in India buy a company that makes them up to 10'-12' in diameter.

Thanks for all the guesses. I have a nice set of flower pots I guess.

They look like the 'foot adapters' for mounting a fire hydrant to the buried water line. You might be able to sell them a local municipal water company or a road building contractor.