Page 1 of 1

cultivator hookup

Posted: Fri Feb 25, 2005 8:49 pm
by jlcross81
I purchased a corn cultivator for my cub and I need to find some pics on how to hook it up the front part that slides into the square housing near the from axle?? Thanks

Posted: Fri Feb 25, 2005 8:52 pm
by Bigdog
Check this link and go to the bottom of the page:

http://www.tm-tractor.com/gim/gim_001.htm

Posted: Fri Feb 25, 2005 9:15 pm
by Rudi
jlcross81:

You can also check out the Cultivator Manuals on the Cub Manual Server. Both the Cub-144 and the Cub-252 Cultivator Manuals are there. I think the one you want is the 144. This is the cultivator that I have and use with my corn.

Now on to the good stuff:

Welcome to the greatest forum on the internet, and to the Cub Family. You will find that all the folks on this forum are kind, helpful and just full of Cub info and knowledge. They also happen to be the finest folks I have ever met :!: :D

Ok, so here is the spiel.

I would suggest that you read this thread: New Members and Visitors, Please READ. There are many great links to informative pages such as the ATIS FAQ's (both 1 and 2), The Best of H.L. Chauvin who has written very interesting articles on troubleshooting common problems with your Cub.


Also, you might want to visit the Cub Manual Server as there is tons of info on servicing, maintaining and re-building your Cub.

I would also recommend that you visit Binder Books and purchase the Owner's Manual, the GSS-1411 Service Manual and the TC-37F Parts Manual. Although they are available on the server, it is better is you also have your own paper copy. Binder Books is the only licensed IH publication reprint shop and they have the best quality.

I truly hope that you enjoy your Cub and that you will be a frequent contributor to the forum. Again, welcome to the Cub F