Switch to full style
All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Feed Grinding

Mon Jan 30, 2012 8:38 pm

got the Letz feed grinder hooked up to power today!---Ole David-Bradley did great on it!!

http://www.youtube.com/watch?v=w3G6vDWINKI



http://www.youtube.com/watch?v=6QlzoolztVo



Here would be the proof!LOL!!! thanks; sonny
Last edited by SONNY on Mon Feb 13, 2012 1:25 pm, edited 2 times in total.

Re: Feed Grinding

Mon Jan 30, 2012 8:44 pm

Sonny, that was pretty cool. :D :D

Re: Feed Grinding

Mon Jan 30, 2012 8:53 pm

Sonny,

Looks like you need a sheller an you will be good to go! :D

Pretty slick, thanks for sharing,

Re: Feed Grinding

Mon Feb 06, 2012 11:31 pm

Nice Sonny, I would like to get my 4-E set up and start buying ear corn by the ton. :big afro:

Re: Feed Grinding

Wed Feb 08, 2012 7:08 pm

Toys ... errrrrr tools like that make having critters a lot more economical. Wish I had then when we had all of our birds :D Enjoyed the vids Sonny.

Re: Feed Grinding

Wed Feb 08, 2012 7:16 pm

Thanks for posting the great videos !

Re: Feed Grinding

Sat Feb 11, 2012 9:41 am

Great video...wish I had something like that to run off my Cub at the county fair!

Re: Feed Grinding

Sat Feb 11, 2012 10:11 pm

Dusti Snider wrote:Great video...wish I had something like that to run off my Cub at the county fair!

The Mercer County Fair, and just when might that be Dusti ?
Sure would like to get this little boy down that way this Summer.
Have plans to take him snow tubing at Winterplace near by you sometime soon.

Very nice video Sonny, just wondering if that will work it up fine enough for cornmeal ?
All new to me, I'd never seen it done until my trip to La this past Fall.
I remember my dad having a hammer mill for our John Deere when I was little, seems it had a screen in the bottom and everything came out pretty course.

Re: Feed Grinding

Sun Feb 12, 2012 2:04 pm

Yogie,

Mercer County Fair is August 3rd and 4th 2012. We have it on the grounds of Pikeview high School, just off exit 14 on I-77. We have a large antique tractor pull on Saturdays and a open rodeo on Friday and Saturday nights.

Three years ago I started a tractor and engine show there and we had two tractors, both of which were mine. About nine tractors the following year. Last year I think we had 13 tractors and a couple engines. So it is growing. I was elected president of the board this year and I'm somewhat afraid it'll pull me away from my activities with the antique equipment.

Here's a link to photobucket album where I posted some pictures, many taken by one Gary Bailey..."BC"...Before Cub...Lol

http://s71.photobucket.com/albums/i139/ ... ty%20Fair/

I'd love to you down for the Fair, and anyone else you want to bring. It's not a huge Fair, only recently "resurrected". The original "Bluestone Valley Fair" originated back in the 50's in Spanishburg, WV.

Here's a link to our Fairs website and facebook
https://www.facebook.com/pages/Mercer-C ... 6837708395
http://www.fairofmercercounty.com/

Re: Feed Grinding

Sun Feb 12, 2012 4:32 pm

Thanks so much Dusti, I think Grayson and I could have a cub or two there if it's open for anyone to enjoy.
That's not to far from us and 4 lane about all the way. :{_}:

Re: Feed Grinding

Mon Feb 13, 2012 1:22 pm

They made different size burrs for the mills,--hammermills on the other hand used screens with different size/shape holes/slots to control the final size output material!--- with the correct size screens/burr sets you can easily make flour!
a guy North of me even has a very large flour sifter mounted on old wagon gear that sifts the ground flour into 3 or 4 different grades!---very unusual looking machine, very heavy, very high noise level, has several different racks with marbles inside to work the flour to grade it and send it down the right spout
Rudi!!Thanks for the help! thanks; sonny

Re: Feed Grinding

Thu Mar 22, 2012 7:55 pm

Sonny - Just brought home a Getz burr mill last Sun. hope to get it set up soon. Ground many buckets of feed for the cows & chickens when I was growing up. Have a belt pulley coming for one of my cubs - or can use grandpa's B like dad did! Enjoyed the video (and I do have a corn sheller that works!). Dusty B
Post a reply