Farmall Cub

I bought this IHC 1-A Hammer Mill from an Amishman in Kentucky a few weeks ago. I'm going to be making a road trip soon to get it. It is in a barn in Glasgow, Kentucky. It is complete, operational, and no rust. The black stenciling is still on the chute.

Bud, you're gonna have to buy a farm with a large barn for all your stuff.

Nice one Bud! Are you going to leave it original?

Yes, I plan on leaving it just like it is. I have got to find a six inch wide flat belt so I can use it with my '45 B Farmall.

Cub Bud,

McMaster-Carr if you have them around you, has any size flat belt you need.

Most feed and farm stores used to keep belting, and you can also get it here.
http://www.hitnmiss.com/25a.html

Don't hold me to it but I think I saw belting at TSC lasttime I was in

Cub-Bud
Around here the easiest way to find a belt is at farm auctions of older farmers that are retiring, or farm estate auctions, or at antique engine/tractor shows.

Very Nice CB

Was in Glasgow KY myself last May picking up the '59 Cub. Nice town. Nice folks. Nice country. Good Cub huntin' area too.

If you like Corvettes, stop by the plant there in Bowling Green ..its just up the road a piece.

Those vettes won't get as good a gas milege as your cubs

Those vettes won't get as good a gas milege as your cubs

yae, but the 'vettes are still the best turnin' the ladies heads

still WANT a '69 red vette.. gonna do it one day soon

P.S. it's not 2150 red

Cub-Bud
Have you seen this belt on epay? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=63967&item=7503120683&rd=1

Thanks, Paul. I'll be watching it.