Switch to full style
All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Fairbanks-Morse Gen

Sun Mar 25, 2012 8:04 pm

Can anyone direct me to any info on this unit?? Have searched the internet from end to end w/no results! It is 2 cal, water cooled, cast iron radiator shell, a 3KW generator on the back, not stuck, But NO luck in info on it! Markings - DE W36-550, Ser. # 118.397003. DC 16 V 10 Amp. Any ideas as to age, value, parts source, etc. would be greatly appreciated! Thanks[*]
Attachments
IMG_2826.jpg
IMG_2826.jpg (36.28 KiB) Viewed 266 times
IMG_2824.jpg
IMG_2824.jpg (34.96 KiB) Viewed 266 times
IMG_2823.jpg
IMG_2823.jpg (34.09 KiB) Viewed 266 times

Re: Fairbanks-Morse Gen

Sun Mar 25, 2012 9:58 pm

http://www.smokstak.com/forum/archive/i ... p/f-6.html

Above site has several posts on fairbanks-morse generator sets.

What I do on something like this is to join the board. Ask questions. Pick their brains.

Re: Fairbanks-Morse Gen

Mon Mar 26, 2012 7:42 am

Tried to register would not accept my password?!?! Don't know what was going on or what the secret is! Dusty B

Re: Fairbanks-Morse Gen

Thu Mar 29, 2012 6:02 pm

I have a unit that is very similar to yours, although mine is a DC type generator, 32vdc I believe. Voltage is adjustable to a certain extent. It is a Onan engine with an FM generator.

When I got it about 1988, it was minus the magneto. A counterclockwise rotating magneto to be exact. Back then, before the internet, after lots of reading and phone calling and begging guys to look for mags for me~ I found a guy who wheeled and dealed and repaired mags. I called him and explained what I needed- a 2 cylinder CCW magneto. CW magnetos were a dime a dozen- maybe even a nickle- but CCW mags were non-existent as far as I could tell.

Luckily, he had one of them. $180 as is, or $250 r-t-r. I whined enough that he finally said he'd go thru it and get it in top shape and sell it to me for the lower price!

If I get a round to-it, I could take a picture of it so you can see what it looks like.

Re: Fairbanks-Morse Gen

Fri Mar 30, 2012 10:59 am

Dusty, as to your not being able to register on smokstak it might be your e-mail provider not the password. I don't remember off hand if there is any criteria for passwords but I do know that some e-mail providers are blocked because of to much spam and hacker use. I think that the problem is that some of these providers don't provide enough security of their own. I know that my e-mail (hotmail) is on the short list and may be blocked at any time now.

Re: Fairbanks-Morse Gen

Fri Mar 30, 2012 11:08 am

Your password might be in use by someone else, try adding a few numbers to it.

Re: Fairbanks-Morse Gen

Fri Mar 30, 2012 11:00 pm

I have been a member over there for a long time and had no problem signing up!-----Your password has to have a long number (I think its 8 digits min. and you may even have to mix numbers with letters now days! thanks; sonny
Post a reply