All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Sat Jun 16, 2012 8:50 am
I have a plow that I was told was for a cub, however, when I tried to mount it I found that the bracket holes were too wide. This looks just like a 193 plow, but the holes span across 4 holes on the drawbar (don't line up exactly) instead of 3 holes like in the manual. Could this be for an A or C? The numbers after the IH symbol are: Beam-512504R1,Bottom-515708R1,also on the bottom-SC1.
Sat Jun 16, 2012 9:58 am
The beam on my 193 has IH 512320R1. It fits my Cub perfectly. I don't know what your numbers mean, but someone will.
Sat Jun 16, 2012 10:37 am
I checked the CaseIH On-Line Parts Lookup
. The beam comes out as for an A-193 IH 1 Way 1 Furrow Moldboard Plow. The bottom and share don't come up... probably because they fit others as well.
Sat Jun 16, 2012 7:19 pm
Thanks Rudi, and thanks for the link also!
Sat Jun 16, 2012 10:37 pm
You is welcome
I used to have a manual for that on the server, but somehow it got misplaced. Still looking to see if I have the original in my collection somewhere.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.