This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Sears Corn Sheller
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Sears Corn Sheller
I have been looking for a sheller for a while. A McCormick-Deering was my first choice but I found a deal on this Sears-Roebuck model. It was electric driven but the motor is shot. Do you think, if I gear down a Cub pto, that a Cub will turn it without making it a candidate for the scrap yard?
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
- Bob Perry
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Re: Sears Corn Sheller
2 words come to mind: slip clutch
REMEMBER: Keep it correct or you may face the
- Bob Perry
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Re: Sears Corn Sheller
REMEMBER: Keep it correct or you may face the
- Virginia Mike
- 10+ Years
- Posts: 1300
- Joined: Tue Nov 23, 2004 7:21 pm
- Zip Code: 24095
- Tractors Owned: '49 Cub
'49 JD "B"
'79 JD 2040
'50 DB "Garden Tractor"
'52 DB "Super Power"
'56 DB "Big 5"
'62 DB "Super 600"
'37 McCormick Deering "LA" engine - Location: Stewartsville, Virginia
Re: Sears Corn Sheller
My two words are: "Jack Shaft".
Best,
Mike
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
Mike
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
-
- 10+ Years
- Posts: 1173
- Joined: Thu Jun 10, 2010 6:56 am
- Zip Code: 49053
- Circle of Safety: Y
- Location: Galesburg, MI
Re: Sears Corn Sheller
With proper gearing why not? A cub should be able to handle that sheller at idle so all you would need to do is get close and handle the rest with throttle. Vern
- Tezell
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
- Contact:
Re: Sears Corn Sheller
That would probably be a one of a kind item there Bill.
Go for it.
Go for it.
"I ain't believing this!"
- Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Sears Corn Sheller
I figured that if an ice cream maker will hold up to a Cub then this should to. Is it overkill? Absolutely, but that's why we have fun with our Cubs.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Team Cub Mentor
- Posts: 5634
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Sears Corn Sheller
I think that one is the same as the one we had on the farm way back when. Bill' have someone crank it, at a pretty good clip, while you check the flywheel RPM with a hand held tach. That will give you a pretty good idea of what's needed to run it from the Cub's pto. I think most of these have some extra shaft extending beyond the flywheel so it would be simple to connect there.
-
- Team Cub Mentor
- Posts: 20370
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Sears Corn Sheller
Math problem: Electric motor tag, rpms. Probably 1545. Pulley diameters on electric motor and on corn sheller. Then if any, the reduction in driving the flywheel.
Mark flywheel and drive pully on motor side. One rotation of flywheel, count revolutions on drive pully.
Mark flywheel and drive pully on motor side. One rotation of flywheel, count revolutions on drive pully.
Guessing you won't need to gear the Cub down to operate the corn sheller. Considering that the electric motor is probably a 1/4 horse, you will need something to slip if there is a malfunction within the sheller.Do you think, if I gear down a Cub pto, that a Cub will turn it without making it a candidate for the scrap yard?
I have an excuse. CRS.
- Bob Perry
- Cub Pro
- Posts: 1866
- Joined: Sun Feb 22, 2009 3:30 pm
- Zip Code: 02748
- Tractors Owned: :
1949 Farmall Cub / FH
1951 Farmall Cub / IH mower
1964 International Cub Lo-Boy / Woods 59 mower
1967 International Cub / FH
1946 Farmall H
1949 Farmall H
a doodle bug
More than a dozen Cub Cadets running plus a few in the bone-yard
. - Location: Dartmouth, Massachusetts
Re: Sears Corn Sheller
You guys are bringing up bad memories of the turnip grinder, when I was a kid. My father didn't need to hook it up to a Cub, he had me!
REMEMBER: Keep it correct or you may face the
- Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Sears Corn Sheller
There is a pulley mounted behind the flywheel that that is belted to a smaller pulley below it
The smaller pulley is on a shaft that goes through a pillow block to the other side.
The other side shows the shaft mounted in another pillow block but no pulley.
The shaft has a jagged cut and appears to have had a pulley mounted but cut off with along with part of the
shaft. The electric motor most probably ran that missing pulley and in turn powered the opposite side.
The smaller pulley is on a shaft that goes through a pillow block to the other side.
The other side shows the shaft mounted in another pillow block but no pulley.
The shaft has a jagged cut and appears to have had a pulley mounted but cut off with along with part of the
shaft. The electric motor most probably ran that missing pulley and in turn powered the opposite side.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
- Bill Hudson
- Team Cub
- Posts: 9522
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: Sears Corn Sheller
Bill,
If memory serves me correct, the "pulley" with the belt on it is a sprocket for a chain drive.
Bill
If memory serves me correct, the "pulley" with the belt on it is a sprocket for a chain drive.
Bill
- Denny Clayton
- 10+ Years
- Posts: 4565
- Joined: Wed Feb 05, 2003 1:18 pm
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
- Location: OH, Sidney
Re: Sears Corn Sheller
Bill Hudson wrote:Bill,
If memory serves me correct, the "pulley" with the belt on it is a sprocket for a chain drive.
Bill
I have a McCormick-Deering sheller and that "pulley" I believe had a round leather belt that ran down to the smaller pulley. At the bottom corner there is a fan inside that blows air to clear out the chaff. I'll have to go out and look closer. Check this link for the IH sheller:
http://www.old-engine.com/keystone.htm
- Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Sears Corn Sheller
Denny Clayton wrote:
Will mine work better if I dress like the guy in the pic or would I be okay wearing just my clown suit?
Last edited by Barnyard on Fri Jun 29, 2012 11:07 am, edited 1 time in total.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
- Virginia Mike
- 10+ Years
- Posts: 1300
- Joined: Tue Nov 23, 2004 7:21 pm
- Zip Code: 24095
- Tractors Owned: '49 Cub
'49 JD "B"
'79 JD 2040
'50 DB "Garden Tractor"
'52 DB "Super Power"
'56 DB "Big 5"
'62 DB "Super 600"
'37 McCormick Deering "LA" engine - Location: Stewartsville, Virginia
Re: Sears Corn Sheller
Denny's link gives you a shaft speed of 225-250 RPM, that would work for yours too. You can see holes where the drive pulley bolted to the flywheel.
I have a older wood framed sheller that I belted to my Cub, it was way to fast at idle, and nearly shook it apart.
You need to run it at hit-and-miss engine speeds.
I have a older wood framed sheller that I belted to my Cub, it was way to fast at idle, and nearly shook it apart.
You need to run it at hit-and-miss engine speeds.
Best,
Mike
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
Mike
Tractors are made to work!
"A Cub will do as much as a team of horses,.. More in hot weather!" - C. W. Spradlin 1909-1994
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 7 guests