Woods 6 ft mower cuts belts in half

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Woods 6 ft mower cuts belts in half

Postby Chris D » Mon Mar 18, 2013 8:27 pm

I have a friend who has a mower from woods like the one picture. Problem he is having it that when mowing the fields if he hits a clump of grass that is thick or something else is that it almost always cuts the belt in half at the bottom of the big center wheel. He says it seems as one blade slows down from the thicker grass just slightly the mower belt catches between another pulley and the big center one and splits the belt. I know nothing about these mowers so I figure I would ask here and see if I could help him. He says belts are getting very costly... Any thing to look at or inspect? Mower will run fine all day if it's just sitting behind the tractor doing nothing.

Image
Chris D
Cub Star!!
Cub Star!!
 
Posts: 397
Joined: Tue Nov 30, 2010 7:54 pm
Zip Code: 23027
Circle of Safety Award
Circle of Safety: Y

Re: Woods 6 ft mower cuts belts in half

Postby JackF » Wed Mar 20, 2013 8:38 am

On my Woods 59 I had the similar problem with the belt breaking, not with hitting clumps but trying to cut too tall of grass/weds. After the belting breaking twice I called woods they said two things: 1) the mower is designed only to cut grass maximum four inches tall … 2) try upgrading the belt to an industrial spec.

I did #2 early last summer and … so for no problems. The heaver belt is really stiff and hard to bend. I tried to find the manufacture name of the belt and I can’t find it, all I can see on the belt is a green strip which I guess means industrial spec. The cost if I remember was $15 more than the cheaper belt from the local farm store. On line probably a lot more savings.
Last edited by JackF on Sat Mar 23, 2013 6:15 am, edited 1 time in total.
I’m really good at doing nothing…With that said…I’m really, really good at doing nothing
JackF
10+ Years
10+ Years
 
Posts: 905
Joined: Sat Feb 15, 2003 7:20 am
Zip Code: 00000

Re: Woods 6 ft mower cuts belts in half

Postby SONNY » Fri Mar 22, 2013 10:28 pm

The heavy stiff belts usually have fiberglass construction or steel backing in them!---the mower is for grass cutting not bush hoggin, BUT 2 years ago I used one to mow head high weeds and never had any problems, but I drove very slow and made a couple passes over it letting it down a little each time!
I just bought a RM 59 at auction yesterday and figure on using it just for the intended use,--- grass cutting! thanks; sonny
SONNY
5+ Years
5+ Years
 
Posts: 2242
Joined: Thu Nov 09, 2006 11:26 pm
Zip Code: 00000


Return to Other Tractors and Machinery

Who is online

Users browsing this forum: No registered users and 2 guests