Tue Aug 06, 2013 10:33 pm
The whine has to be air in the system somewhere .. probably needs to be bled. Give that a shot and let us know what happens.
Wed Aug 07, 2013 6:42 am
I thought the same thing yesterday.
Any thoughts on the best way to do it?
Wed Aug 07, 2013 7:41 am
Slick I talked to the Kubota Rep, he said to use UDT or the equivalent in it and that was one of the reasons that they changed from gear grease to hydraulic fluid.
I will not beat this dog anymore
Wed Aug 07, 2013 8:33 am
You could tell a "udt or equivalent" was what was in it. It was a lot thinner than the gear oil and it whined with it.
I still agree with Rudi I thinks its got air!
Thu Aug 08, 2013 11:36 am
Open the fill port and cycle the hydraulics a lot. You should hear an improvement after a half dozen or so cycles. Check the level again as it may need a bit more fluid.
Keep us posted.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.