Farmall M

Wed Jun 15, 2005 9:21 am

Can anyone tell me where the hydrolic lines connect to on a farmall M and How they rout to the back. I was also wondering which lever operates the hydrolic line. I think mine must have been taken off. Any info and pictures would be great. Thanks

Re: Farmall M

Wed Jun 15, 2005 10:05 am

farmall man wrote:Can anyone tell me where the hydrolic lines connect to on a farmall M and How they rout to the back. I was also wondering which lever operates the hydrolic line. I think mine must have been taken off. Any info and pictures would be great. Thanks


It seems like nearly every M is different. The lines on mine just lay on the deck. They're used for the Saginaw 3pt. The Push-Pull rod on the right side is the control. Do you have a live pump or a belly pump?

Farmall M

Wed Jun 15, 2005 9:04 pm

Im not sure if I have live or belly pump hydrolics. I do not know much about hydrolics. Could you give me any more info or pictures? Thanks

Re: Farmall M

Wed Jun 15, 2005 9:27 pm

farmall man wrote:Im not sure if I have live or belly pump hydrolics. I do not know much about hydrolics. Could you give me any more info or pictures? Thanks


I don't have a good closeup picture, but maybe this will help.

Image

Thu Jun 16, 2005 9:02 pm

I have a belly pump so where do the lines connect?

Mon Jun 20, 2005 9:31 am

You have 2 on the left and one on the right. The one on the right is most commonly used. One of the left ports is delayed when raising and lowering the cultivators. What are you trying to accomplish?

Mon Jun 20, 2005 4:25 pm

Ok thanks. I am trying to run lines to the back so i can raise and lower my disc and plow