Case VAC,---sort of!

[SONNY]

This Case vac was converted into a va by someone!----dash tag still good and readable too!



There is no square holes in the casting under the rad. for the cultivator or loader squares to go into!---the other vac that I have has these cutouts!---I assume thats why the owner did the conversion!---tractor has a good working eagle hitch on the rear!
I had my Woods RM-59 mower on it.---right now its all under 5 feet of snow! thanks; sonny

[jimbauer1970]

Actually that is neither a VAC nor a VA. It is a VAI, the industrial version of the VAC. Extra heavy duty front end and the small 24" rear wheels.

[SONNY]

The serial tag on the dash says vac, and the long rear axles have been cut off with a torch, so I don't have a clue of what it is supposed to be! --or what it started out in life as!---I would still like to find that out if possible! any suggestions or ideas would be helpful! thanks; sonny

[Rodney51Cub]

What year is this beauty ? From what I can see it is a modified VAC. The steering arm and linkage on a VAI is parallel to the ground. The grill on a VAI goes all the way to the bolster, not like the narrow front VAC. I will try to post a couple pictures of my 1950 VAI for you to compare with. Also the shift pattern is different on the VAI.

I am no means a Case expert, but from what I see and have read about the VAI, yours is a owner modified VAC.

Rodney