Snow Blower-TORO 3521 w/Tecumseh H35 engine

All non-Cub/Cadet/IH/Farmall/Case tractor and machinery discussions.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
staninlowerAL
5+ Years
5+ Years
Posts: 2660
Joined: Fri Oct 29, 2010 11:34 pm
Zip Code: 36558
Tractors Owned: Cubs: (3)'49's, (1)'52, (1)'57 IH Cub LoBoy w/FH, (1)'72 154 Number Series Loboy, '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '53 MM BG (offset), (2) '49 Avery V's, '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76 Yanmar 1500, Sears Surburban's, MTD's, Jeeps & other misc. "treasures"
Location: AL (Southwest)

Snow Blower-TORO 3521 w/Tecumseh H35 engine

Postby staninlowerAL » Wed Oct 08, 2014 7:51 pm

Looking for a parts machine or carb to governor linkage. The engine model number is H35-45598T, 3.5 hp, horizontal shaft. Any help/source is welcome. Thanks, Stan

EDIT: A picture or measured length would also be helpful.

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 16105
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Snow Blower-TORO 3521 w/Tecumseh H35 engine

Postby Eugene » Thu Oct 09, 2014 9:01 pm

May be able to help, but it may be some time before I can get to the acreage to measure the rod. 10 more days of rain forecast and flash flood warnings.
I have an excuse. CRS.

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 16105
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Snow Blower-TORO 3521 w/Tecumseh H35 engine

Postby Eugene » Fri Oct 10, 2014 8:01 am

Manually move the carburetor lever and governor lever to full throttle position. Measure the distance between the holes in the linkage. When making the link, shorten up the distance by 1/8" so that the engine does not over rev. If engine over revs, you can put a slight bend in the link to reduce the rpms.

Been raining for 36 hours or more. More rain expected. No use trying to go to acreage to measure the linkage. Two low water crossings and both will be flooded.
I have an excuse. CRS.

staninlowerAL
5+ Years
5+ Years
Posts: 2660
Joined: Fri Oct 29, 2010 11:34 pm
Zip Code: 36558
Tractors Owned: Cubs: (3)'49's, (1)'52, (1)'57 IH Cub LoBoy w/FH, (1)'72 154 Number Series Loboy, '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '53 MM BG (offset), (2) '49 Avery V's, '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76 Yanmar 1500, Sears Surburban's, MTD's, Jeeps & other misc. "treasures"
Location: AL (Southwest)

Re: Snow Blower-TORO 3521 w/Tecumseh H35 engine

Postby staninlowerAL » Fri Oct 10, 2014 8:58 am

Thanks, the information you provided is great, a picture and measurement would be tremendously helpful. I'm trying to help my brother, who is in Montana, with this project. Stan

User avatar
Denny Clayton
10+ Years
10+ Years
Posts: 4227
Joined: Wed Feb 05, 2003 1:18 pm
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety: Y
Location: OH, Sidney

Re: Snow Blower-TORO 3521 w/Tecumseh H35 engine

Postby Denny Clayton » Fri Oct 10, 2014 9:33 am

staninlowerAL wrote:Thanks, the information you provided is great, a picture and measurement would be tremendously helpful. I'm trying to help my brother, who is in Montana, with this project. Stan

Well, now that makes more sense! I couldn't imagine what you were doing with a snow blower in southern Alabama. :lol:
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'48 Cub
C-3 mower, FH Woods 42F, 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
Image
Circle of Safety

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 16105
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Snow Blower-TORO 3521 w/Tecumseh H35 engine

Postby Eugene » Sat Oct 11, 2014 2:26 pm

2 1/8" from the bend in the wire entering the carburetor linkage to the bend in the wire entering the governor linkage.

Measurement was taken on H-35 engine attached to a generator head.
I have an excuse. CRS.

staninlowerAL
5+ Years
5+ Years
Posts: 2660
Joined: Fri Oct 29, 2010 11:34 pm
Zip Code: 36558
Tractors Owned: Cubs: (3)'49's, (1)'52, (1)'57 IH Cub LoBoy w/FH, (1)'72 154 Number Series Loboy, '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '53 MM BG (offset), (2) '49 Avery V's, '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76 Yanmar 1500, Sears Surburban's, MTD's, Jeeps & other misc. "treasures"
Location: AL (Southwest)

Re: Snow Blower-TORO 3521 w/Tecumseh H35 engine

Postby staninlowerAL » Sat Oct 11, 2014 8:25 pm

Thanks for the information. We should be able to get it going with this info. Stan


  • Similar Topics
    Replies
    Views
    Last post

Return to “Other Tractors and Machinery”

Who is online

Users browsing this forum: No registered users and 1 guest