This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
What cultivators fit a Farmall M
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- dirt devil
- Cub Pro
- Posts: 1426
- Joined: Sat Jun 10, 2006 9:31 am
- Zip Code: 04461
- Skype Name: dirtdevil919
- Tractors Owned: 1955 Farmall Cub
1963 Farmall Cub
1965 IH Cub Lo Boy
1964 Cub Cadet 100
1967 Cub Cadet 123 - Location: ME, Milford
What cultivators fit a Farmall M
My dad picked up a Farmall M last weekend and after dad bought the tractor the guy mentioned that he had some cultivatrors so of course we had to ask where and went and looked at them. As far as I know they are original but do have a couple of the arms cut off (rear section) We ended up with both sides and cylinders and the rear section cultivators.
This tractor also has the M & W 9 speed tranny and the M & W hand clutch. Two nice bonuses. The PO also installed a Super M engine. Dad's intent is to try and go to some tractor pulls next year.
The only downside is that the right side has a bad bearing that we need to fix before we do much of anything.
My question is what models were made to fit the M and does anyone have pics. I would like to get my dad the manuals since his birthday is around the corner.
Here's Bert and his Big brother
[img][img]http://i110.photobucket.com/albums/n111/dirtdevil919/HPIM1125.jpg[/img]
Here is the ole girl finally home
[/img]
Thanks Dave
This tractor also has the M & W 9 speed tranny and the M & W hand clutch. Two nice bonuses. The PO also installed a Super M engine. Dad's intent is to try and go to some tractor pulls next year.
The only downside is that the right side has a bad bearing that we need to fix before we do much of anything.
My question is what models were made to fit the M and does anyone have pics. I would like to get my dad the manuals since his birthday is around the corner.
Here's Bert and his Big brother
[img][img]http://i110.photobucket.com/albums/n111/dirtdevil919/HPIM1125.jpg[/img]
Here is the ole girl finally home
[/img]
Thanks Dave
Last edited by dirt devil on Sun Sep 24, 2006 10:24 am, edited 1 time in total.
Dave
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Nice!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- dirt devil
- Cub Pro
- Posts: 1426
- Joined: Sat Jun 10, 2006 9:31 am
- Zip Code: 04461
- Skype Name: dirtdevil919
- Tractors Owned: 1955 Farmall Cub
1963 Farmall Cub
1965 IH Cub Lo Boy
1964 Cub Cadet 100
1967 Cub Cadet 123 - Location: ME, Milford
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
We had a set of 2 row and 4 row for our M's and H's but I don't recall the model number of them.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
- dirt devil
- Cub Pro
- Posts: 1426
- Joined: Sat Jun 10, 2006 9:31 am
- Zip Code: 04461
- Skype Name: dirtdevil919
- Tractors Owned: 1955 Farmall Cub
1963 Farmall Cub
1965 IH Cub Lo Boy
1964 Cub Cadet 100
1967 Cub Cadet 123 - Location: ME, Milford
OK here are some pics of the cultivators
[img][img]http://i110.photobucket.com/albums/n111/dirtdevil919/HPIM1179.jpg[/img]
[/img]
[img][img]http://i110.photobucket.com/albums/n111/dirtdevil919/HPIM1175.jpg[/img]
[/img]
[img][img]http://i110.photobucket.com/albums/n111/dirtdevil919/HPIM1171.jpg[/img][/img]
[img][img]http://i110.photobucket.com/albums/n111/dirtdevil919/HPIM1179.jpg[/img]
[/img]
[img][img]http://i110.photobucket.com/albums/n111/dirtdevil919/HPIM1175.jpg[/img]
[/img]
[img][img]http://i110.photobucket.com/albums/n111/dirtdevil919/HPIM1171.jpg[/img][/img]
Dave
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
I don't have a picture of anythig that is an exact match. I'm leaning towards MH-238. There was also a similar HM-236.
Binder books has manuals for both. Or:
http://cgi.ebay.com/MC-CORMICK-OWNERS-SETTING-UP-PARTS-HM-238-CULTIVATOR_W0QQitemZ180031229521QQihZ008QQcategoryZ36342QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Binder books has manuals for both. Or:
http://cgi.ebay.com/MC-CORMICK-OWNERS-SETTING-UP-PARTS-HM-238-CULTIVATOR_W0QQitemZ180031229521QQihZ008QQcategoryZ36342QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
- dirt devil
- Cub Pro
- Posts: 1426
- Joined: Sat Jun 10, 2006 9:31 am
- Zip Code: 04461
- Skype Name: dirtdevil919
- Tractors Owned: 1955 Farmall Cub
1963 Farmall Cub
1965 IH Cub Lo Boy
1964 Cub Cadet 100
1967 Cub Cadet 123 - Location: ME, Milford
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
- jostev
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
- Contact:
Thanks for bringing this up Dave, cause i have a bunch of questions about a set for an H too...
Jim, what would a set just like these but not seperate front pieces be (i think that's what i'm getting, haven't had a good look at them yet)
Thanks
Johnny
Jim, what would a set just like these but not seperate front pieces be (i think that's what i'm getting, haven't had a good look at them yet)
Thanks
Johnny
70 Brockway 361
http://photobucket.com/albums/c47/jostev/
http://photobucket.com/albums/c47/jostev/
- dirt devil
- Cub Pro
- Posts: 1426
- Joined: Sat Jun 10, 2006 9:31 am
- Zip Code: 04461
- Skype Name: dirtdevil919
- Tractors Owned: 1955 Farmall Cub
1963 Farmall Cub
1965 IH Cub Lo Boy
1964 Cub Cadet 100
1967 Cub Cadet 123 - Location: ME, Milford
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
- jostev
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
- Contact:
- KETCHAM
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
- Contact:
Nice Super M !! I would like to get a set of cultivators for my H but have two sets for my cubs.Don't have a big enough garden yet for the H.Notice the word YET!!!Need to get a new job[out of work now]and get a couple of tractors painted before the H gets any new toys.KETCHAM
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
- KETCHAM
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
- Contact:
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 7 guests