F130 Compression Readings

Farmall 100, 1954 - 1973

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

F130 Compression Readings

Postby EZ » Mon Nov 27, 2006 6:28 pm

Followed instructions with compression tester and got the following readings on the F130 with C123 engine.
1=125 PSI
2=125 PSI
3=125 PSI
4=125 PSI

Good readings for this engine?

The manual states compression as 6.5:1 ratio, but that's greek to me :shock:

Also got some wierd squeaking noise while checking #4, maybe a stuck intake valve?
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Postby EZ » Mon Nov 27, 2006 6:43 pm

I knew GW had went over this with me before. Way back in '03.

http://www.ytmag.com/cgi-bin/viewit.cgi?bd=farmall&th=357040

I should be happy with 125 PSI on the 130.
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Postby Bigdog » Mon Nov 27, 2006 6:45 pm

Those are good readings. Especially if they are dry readings.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23814
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Re: F130 Compression Readings

Postby Jim Becker » Mon Nov 27, 2006 10:16 pm

EZ wrote:Also got some wierd squeaking noise while checking #4, maybe a stuck intake valve?

Can't be too stuck with that compression.
User avatar
Jim Becker
Team Cub
Team Cub
 
Posts: 11847
Joined: Sun Feb 02, 2003 3:14 pm
Location: TX/MN
Zip Code: 75048
Circle of Safety Award
Circle of Safety: Y


Return to Farmall 100 Series, 100, 130, 140

Who is online

Users browsing this forum: No registered users and 1 guest