Here's my fuel gauge for my 350u. I fixed the glass after I fumbled it. I bought it off E-pay for about $50. Bad shape. Lots of work to restore it.Had lots of fun and it works great. Its a must have . You still have to stand up to read it. Pain wiring every other gauge ,(no room). The little (open) decal, the original one was under lots of coats of paint.. That's where I knew where to put it.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
IH Gas gauge
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- RedNed
- 10+ Years
- Posts: 481
- Joined: Mon Feb 03, 2003 6:32 pm
- Location: Long Island,New York
IH Gas gauge
1960 f-cub,IH Cub Cadet model 76, 125,
1957 IH350u
1957 IH350u
-
- 10+ Years
- Posts: 565
- Joined: Mon Apr 07, 2003 11:35 am
- Location: Morristown, New Jersey
Bob
Wow . . .looks terrific! Paint finish is super, and I like the stainless steel fasteners. Great detailing. Pretty soon you'll be ready for a new project, right?!!
Wow . . .looks terrific! Paint finish is super, and I like the stainless steel fasteners. Great detailing. Pretty soon you'll be ready for a new project, right?!!
51 Cub; IH 340 Utility; IH 240 Utility http://public.fotki.com/PWS/
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
- RedNed
- 10+ Years
- Posts: 481
- Joined: Mon Feb 03, 2003 6:32 pm
- Location: Long Island,New York
Jim
I know. Think they did that at the factory or dealer?Don't think the farmer was as looney as me.I remember when I stripped my hood on my cub. Under all the layers of paint,rust . patches of discolor squares and rectangles. You got them all right. What do ya think? Have to go to wisconsin historical society to find one dem dare pictures.
Just did a archive on E-bay check this out (tll them to turn that around ):lol:
http://cgi.ebay.com/NOS-FARMALL-A-B-C-I ... dZViewItem
Paul
Thanks buddy.Aircraft hardware Powdercoated dash, ppg fairings. One thing bad about powdercoating. Lose ground time to time notice needle on amp gauge.Its giving me fits. As far as a new project. I don't think so, my wife is a angel.Can you amagine if I brought home a Super MTA.
I know. Think they did that at the factory or dealer?Don't think the farmer was as looney as me.I remember when I stripped my hood on my cub. Under all the layers of paint,rust . patches of discolor squares and rectangles. You got them all right. What do ya think? Have to go to wisconsin historical society to find one dem dare pictures.
Just did a archive on E-bay check this out (tll them to turn that around ):lol:
http://cgi.ebay.com/NOS-FARMALL-A-B-C-I ... dZViewItem
Paul
Thanks buddy.Aircraft hardware Powdercoated dash, ppg fairings. One thing bad about powdercoating. Lose ground time to time notice needle on amp gauge.Its giving me fits. As far as a new project. I don't think so, my wife is a angel.Can you amagine if I brought home a Super MTA.
1960 f-cub,IH Cub Cadet model 76, 125,
1957 IH350u
1957 IH350u
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
- KETCHAM
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
- Contact:
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 6 guests