This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 tranny ?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- junkman1946
- 10+ Years
- Posts: 761
- Joined: Thu Oct 19, 2006 2:31 pm
- Location: Cape Cod Ma.
154 tranny ?
I ran into an old friend last nite who has a 154 LoBoy aprrox. late 60s vintage. He has a tranny problem that I volunteered to ask the experts here at the forum. It jumps out of reverse only. Fine in all forward gears, sometimes it is difficult to even get into reverse, when it does it will jump out.. without warning at any time. Ive run across this in trucks but never in reverse gear, and with the trucks it was the Syncros. Id like to hear from the forum before attempting a cure for him. Thanks much, Frank
1948 Cub F,1962 Original,1971 C.C.model86, WheelHorse and C.C. mini pulling tractors, C.C. models1450 , 682,106,123, Ariens GT17 with loader,Jacobsen Powermax loader and backhoe 8 more Cub Cadets in the shed waiting to go under the knife and spray gun.
- Ralph
- Cub Pro
- Posts: 2673
- Joined: Sun Feb 02, 2003 7:01 pm
- Zip Code: 41005
- Tractors Owned: Near 200 cubs through the years
- Circle of Safety: Y
- Location: Ky Florence Y'ALL
- Rick Prentice
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
- Contact:
Hi Frank. Ralph's usually right on the money. Here's some posts about the same issues your friend has. http://www.farmallcub.com/phpBB2/search.php?mode=results
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
- Steve Butram
- Cub Pro
- Posts: 2461
- Joined: Mon Feb 17, 2003 7:53 am
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub - Circle of Safety: Y
- Location: IN West Lafayette
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
I had a first and reverse problem witrh my 154 but as soon as i adjusted the two clutch adjustments it works fine now. You need to have .090" gap between the clutch fingers and the throwout bearing and .010" between the tranny flywheel and the pucks on the flywheel brake. Once i adjusted it correctly the grinding gears stopped and it went right into gear and stayed in and it doesn't pop out anymore. The first few times driving the 154 I would shut it off to change gears then i read the manual and figured out to check the clutch adjustment first after it was popping out of gear from not being fully ingaged in gear when i shifted it in. Its a tricky setup but once its right its awesome. You could have more problems but i started with the easiest one first. I got lucky so far.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
- Steve Butram
- Cub Pro
- Posts: 2461
- Joined: Mon Feb 17, 2003 7:53 am
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub - Circle of Safety: Y
- Location: IN West Lafayette
- junkman1946
- 10+ Years
- Posts: 761
- Joined: Thu Oct 19, 2006 2:31 pm
- Location: Cape Cod Ma.
Thanks Bill I didnt realize clutch adj. was that critical. I'll try that before i call Ralph for a new set of forks. Junkmans Motto: cheap and simple is gooooood.
1948 Cub F,1962 Original,1971 C.C.model86, WheelHorse and C.C. mini pulling tractors, C.C. models1450 , 682,106,123, Ariens GT17 with loader,Jacobsen Powermax loader and backhoe 8 more Cub Cadets in the shed waiting to go under the knife and spray gun.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
It could be both problems thats why the forks are bent. Its harder to pull into gear when the clutch isn't adjusted correctly and it won't go all the way into gear when its not adjusted right thus popping out of gear. My 154 is ok now but who knows when i pull it apart it just maybe bent too. I got a funny feeling ralph maybe right too even though i hate to take mine apart and check it right now. The 154 is a great tractor once its fixed/adjusted right. Its a dream to get into gear now. I have no clue what the first gear looks like too nor how long they let it grind to get it into gear.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 13 guests